Please select Into the mobile phone version | Continue to access the computer ver.
New Firmware Update in Fly
1737 27 5-19 22:00
Uploading and Loding Picture ...(0/1)
o(^-^)o
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

Hello,

I see there is a new firmware update that is 335.3mb in DJI FLY.

Is this safe to download? I see that it’s the same version #.  Please let me know if it’s safe. I don’t want another update issue like last time to happen to me.

Thank you.
5-19 22:00
Use props
frankymusik
Captain
Flight distance : 15473652 ft
Germany
Offline

Firmware (for drone itself) or another DJI fly app update ...?
5-20 02:22
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

No. Firmware. It just popped up in my DJI fly app when I posted this thread.

And I did every single update there was already especially after the flysafe error that occurred last week.

I’ll take screenshot in a few
5-20 03:17
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

frankymusik Posted at 5-20 02:22
Firmware (for drone itself) or another DJI fly app update ...?
Here is the screenshots.
530039B3-D16F-4145-AB66-43A9DA84C5C0.jpeg
6F2A550D-06D8-4E27-BF9A-D2260CF02A7A.jpeg
5-20 03:23
Use props
DroneJunkieQc
Captain
Flight distance : 764856 ft
  • >>>
Canada
Offline

YonDel Posted at 5-20 03:23
Here is the screenshots.

This is first ever Firmware for the DJI FPV
5-20 03:36
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

DroneJunkieQc Posted at 5-20 03:36
This is first ever Firmware for the DJI FPV

That’s crazy. I wonder why it’s trying to have me update to it if I been upgraded to it. I did every type of update there was when asked.

But this one is like going backwards.
5-20 03:39
Use props
DroneJunkieQc
Captain
Flight distance : 764856 ft
  • >>>
Canada
Offline

YonDel Posted at 5-20 03:39
That’s crazy. I wonder why it’s trying to have me update to it if I been upgraded to it. I did every type of update there was when asked.

But this one is like going backwards.

Overview
Date: 2021.03.02
Aircraft Firmware: v01.01.0000
Goggles Firmware: v01.01.0000
Remote Controller firmware: v01.01.0000
DJI Fly App iOS: v1.3.0
DJI Fly App Android: v1.3.0

What’s New?
Added support for DJI Motion Controller.
Added ability to take off or land by pressing lock button on motion controller.
Added tutorial videos for motion controller in goggles.
Added calibration for motion controller.
Added ability to switch goggles to DJI Digital FPV System.
Added Turtle mode.
Added Coordinated Turn to Sport mode when using remote controller.
Added Find My Drone under safety settings in goggles.
Added ability to set camera exposure value manually.
Optimized flight performance in all flight modes.
Improved transmission stability between air unit and ground unit.

It showed up on my phone too , they up to something.
5-20 03:41
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

DroneJunkieQc Posted at 5-20 03:41
Overview
Date: 2021.03.02
Aircraft Firmware: v01.01.0000

Yep! I just don’t want to update firmware then to have another problem like we had with flysafe database update. I know this is different type but just trying to be safe.
5-20 03:49
Use props
DroneJunkieQc
Captain
Flight distance : 764856 ft
  • >>>
Canada
Offline

YonDel Posted at 5-20 03:49
Yep! I just don’t want to update firmware then to have another problem like we had with flysafe database update. I know this is different type but just trying to be safe.

Best to just wait .
5-20 03:56
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

DroneJunkieQc Posted at 5-20 03:56
Best to just wait .

I agree.  Hopefully support let us know something soon.
5-20 03:58
Use props
DroneJunkieQc
Captain
Flight distance : 764856 ft
  • >>>
Canada
Offline

YonDel Posted at 5-20 03:58
I agree.  Hopefully support let us know something soon.

Me too! but not holding my breath.
5-20 04:00
Use props
luciens
First Officer
  • >>>
United States
Offline

This can happen if you happen to update the firmware on any of the devices through the DJI Assistant. The next time you plug into DJI Fly, though, it won't recognize that the new firmware is already loaded, and it'll dumbly force you to refresh everything. I found this out with my setup and I had to let it go through the whole thing again via DJI Fly on my iPad....
5-20 06:21
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

luciens Posted at 5-20 06:21
This can happen if you happen to update the firmware on any of the devices through the DJI Assistant. The next time you plug into DJI Fly, though, it won't recognize that the new firmware is already loaded, and it'll dumbly force you to refresh everything. I found this out with my setup and I had to let it go through the whole thing again via DJI Fly on my iPad....

Hey thanks for the reply but I haven’t used Assist since the beginning of the flysafe database problem. I don’t even have it installed in my computer any longer.

Everything was perfect yesterday when I went flying without any firmware update message until the A.M.  when it appeared.
5-20 07:09
Use props
luciens
First Officer
  • >>>
United States
Offline

YonDel Posted at 5-20 07:09
Hey thanks for the reply but I haven’t used Assist since the beginning of the flysafe database problem. I don’t even have it installed in my computer any longer.

Everything was perfect yesterday when I went flying without any firmware update message until the A.M.  when it appeared.

Ah ok. I would agree to still not let it try to update. There's no documentation on it, so I wouldn't let my drone near it...
5-20 07:18
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

luciens Posted at 5-20 07:18
Ah ok. I would agree to still not let it try to update. There's no documentation on it, so I wouldn't let my drone near it...

Correct. I’ll wait until I here something about this. Thank you.
5-20 07:25
Use props
djiuser_iATx0GA2pDdO
New
Flight distance : 89465 ft
France
Offline

I made the update yesterday and everything worked well (only tested a 15 minutes flight with motion controller)
5-20 08:30
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

djiuser_iATx0GA2pDdO Posted at 5-20 08:30
I made the update yesterday and everything worked well (only tested a 15 minutes flight with motion controller)

Ok cool. I just don’t understand why DJI doesn’t announce updates in there website. It so easy.
5-20 09:08
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

Has anyone else updated firmware like DJI Fly app asks to?
5-21 17:33
Use props
Vertigocal
lvl.4
Flight distance : 554928 ft
Germany
Offline

YonDel Posted at 5-20 09:08
Ok cool. I just don’t understand why DJI doesn’t announce updates in there website. It so easy.

Is it really a new update or the first one?
Has anyone found the changelogs?
5-22 00:29
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

Vertigocal Posted at 5-22 00:29
Is it really a new update or the first one?
Has anyone found the changelogs?

I’m not sure. I currently don’t have my drone with me to check. But I do know is that I already went through all firmware updates since the flysafe database update error we all had.

Now all of a sudden this firmware update pops up. Not only on my device but several others a spoke offline.
5-22 01:14
Use props
Vertigocal
lvl.4
Flight distance : 554928 ft
Germany
Offline

YonDel Posted at 5-22 01:14
I’m not sure. I currently don’t have my drone with me to check. But I do know is that I already went through all firmware updates since the flysafe database update error we all had.

Now all of a sudden this firmware update pops up. Not only on my device but several others a spoke offline.

Thanks for your answer.
And the version number is the same as before?
5-22 01:24
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

Vertigocal Posted at 5-22 01:24
Thanks for your answer.
And the version number is the same as before?

Last time I saw it, yes it was the same. I’m on my way back home and I’ll verify again. I don’t understand why it’s trying to re install same version.
5-22 02:54
Use props
djiuser_H5XobTTvqVfW
lvl.2
Flight distance : 1049111 ft
Canada
Offline

Turtle mode does not work. Tried many attempts.
5-22 12:30
Use props
Ramphex
lvl.2
Flight distance : 2361926 ft
United States
Offline

djiuser_H5XobTTvqVfW Posted at 5-22 12:30
Turtle mode does not work. Tried many attempts.

were you in manual mode?
5-22 12:54
Use props
djiuser_H5XobTTvqVfW
lvl.2
Flight distance : 1049111 ft
Canada
Offline

Ramphex Posted at 5-22 12:54
were you in manual mode?

yes i tried in all modes
5-22 13:00
Use props
Ramphex
lvl.2
Flight distance : 2361926 ft
United States
Offline




Check out that guy's video, Test #3 he finally figures out how to do it.
5-22 13:03
Use props
djiuser_H5XobTTvqVfW
lvl.2
Flight distance : 1049111 ft
Canada
Offline

Does not work on all fpv. I tried all modes. Guess you have a good fpv. I must have a defected one. Half of my LEDs lights do not work after installing the arm braces. This is great
5-24 04:40
Use props
YonDel
lvl.3
Flight distance : 15561 ft
United States
Offline

djiuser_H5XobTTvqVfW Posted at 5-24 04:40
Does not work on all fpv. I tried all modes. Guess you have a good fpv. I must have a defected one. Half of my LEDs lights do not work after installing the arm braces. This is great

Can you exchange? My friend friend got one with a none functioning remote control button and he just took it back. I myself exchanged one because of an error we all had not too long ago.
5-24 04:49
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules