DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline
|
Overview:
Version: 3.0.0
Release Date: 2021- 05- 19
Update details:
【New】
- Supports cluster computing mode
- Supports processing Lidar point cloud collected by ZENMUSE L1
【Optimization】
- Increased real-time 3D model processing speed by about 20%
- Increased 3D reconstruction processing speed by about 20%
- Optimized large-scale data reconstruction experience
- Optimized DSM and DOM for 2D reconstruction (DSM reduces the irregular outward expansion of a structure’s borders to make the border appear smoother and less frizzy, while DOM optimizes the border area of a structure)
- Added PLY format and PCD format to 3D point cloud reconstruction results
- Current reconstruction tasks can now be viewed in the task library.
- 3D point cloud reconstruction results can now be displayed according to altitude
- Major upgrades to the aerotriangulation reconstruction speed of the non-gimbal camera images
- Optimized the reconstruction effect of ZENMUSE P1 or other high-resolution images
- Optimized the accuracy of RTK-enabled real-time reconstruction models
- Modify the upper limit of agricultural application route height setting to 30 meters
【Fixes】
- Fixed the issue where only the results of a single area were output when there were more than 1 connected component in the aerotriangulation results
- Fixed the issue of display offset due to incorrect order of latitude and longitude when the point cloud results of a geodetic coordinate system were output in the LAS format
- Fixed the issue of base map offset when 2D reconstruction results were scaled in CAD or Cass software
- Fixed the issue of incorrect GCP mark accuracy when the Windows system scaling setting is not at 100%
【Note】
- Agras T16 or T20 users should use Agras drones with firmware version 02.03.0303 higher to access Agricultural Applications.
- DJI Terra Permanent License update and maintenance fees: Users can update DJI Terra to any version released within the first year of use free of charge, starting from when DJI Terra is bound with a device. From the second year onward, users must pay for version updates annually.
- The Detailed Inspection function is now compatible with DJI Pilot V1.9.0R or later versions.
【Supported Devices】
- Phantom 4
- Phantom 4 Pro
- Phantom 4 RTK (Remote Controller)
- Phantom 4 Pro V2.0
- Phantom 4 Pro + V2.0
- Phantom 4 Advanced
|
|