The Pocket 2 recognise the official DJI ND Filters and works well. But when shutting down the head jerks for 20 seconds outwards before stopping in a slightly tilted positions. Not a proper shutting down I presume. Latest firmware installed. Any advise?

When powering down, the Pocket 2 doesn't turn the lens inward when an ND filter or wide-angle lens is installed. Instead, it parks with the lens pointed out. The Pocket 2 keeps the gimbal powered for about 20 seconds after shut down, to give you time to easily put it in the case without the gimbal flopping around.

Hello there Senturies. Good day and thank you for reaching out. Kindly please post a short sample video showing the said issue for us to see and assist you further? Thank you.

DJI Stephen Posted at 5-23 19:51
Hello there Senturies. Good day and thank you for reaching out. Kindly please post a short sample video showing the said issue for us to see and assist you further? Thank you.

Hello - you can find a video of the issue with official DJI Pocket 2 recognised ND Filter: https://vimeo.com/ericwill/dji-pocket2

or you can download the mp4 from: http://www.eric-will.com/ftp/DJI_Pocket_2_Shut_Down.mp4.zip

Let me know if you have a solution.

Senturies Posted at 5-24 09:58
Hello - you can find a video of the issue with official DJI Pocket 2 recognised ND Filter: https://vimeo.com/ericwill/dji-pocket2

or you can download the mp4 from: http://www.eric-will.com/ftp/DJI_Pocket_2_Shut_Down.mp4.zip

This surely is abnormal hope you find the solution.

I had reported same to support.  I got the "this will be addressed in a future firmware release...."  So maybe someday?

Same issue here :-(

Still, after 3.5 years the same issue. More than annoying and in my opinion a possible source of damage to the motors.

Please, DJI, fix this!