DJI Susan
Administrator
Offline
|
vanP Drone Posted at 6-17 07:45
The gimbal horizon problem is not solved in this latest firmware version, eventime after the gimbal calibration you still have to adjust the horizon of the gimbal during the flight.
With my Air 2 and Mini 1 I had this problem never, its very irritated to adjust every time the horizon of the gimbal during the flight.
New problem with this firmware is that after 400 meters you get RC connection lost. It's looks like that the distance limitation for the Mini SE is in the latest firmware!!!!!
Hi there, I am sorry for the issue you encountered. For the gimbal issue, could you please provide a screen recording of the issue including the gimbal calibration and gimbal adjustment for further confirmation?
For the flight distance, it may be affected by many reasons, such as flight environment, obstacles, antenna position.
We would suggest that you fly the drone in a wide and broad place. Obstacles may block the signal. Also, the position of the antennas makes a great effort, too. Please make sure the remote controller’s antennas are positioned parallel to and are pointed towards the aircraft. Distance should be greater than height during flight. At the same time, you may also try to refresh the latest firmware again.
Please keep us updated if the issue persists.
|
|