I am looking to find developer(s) that have expertise with the DJI mobile SDK.  I am not sure wher to post to try to locate interested individuals.  Any suggestions would be appreciated.

What for ?

Mats Bohlinsson Posted at 6-18 11:06
What for ?

Developing a special purpose controller

CarlM000 Posted at 6-18 11:21
Developing a special purpose controller

More details? What's the challenge? Mobile app?

You have to give a lot more info what your need is.

This include if the developers will be payed, platform, language, drone, location, remote work, and so on.

For the moment it's _very_ hard to find developers, but it helps to have as detailed description as possible. Think reverse writing :-)

Super pilot Posted at 6-19 00:18
More details? What's the challenge? Mobile app?

There are 2 parts:

1)        Drone control from minimal Android application.  This is for allowing a controlled ascent and descent for an M200/M300 which is on a tether (thus requires specific defined parameters on the climb)
a.        Control system is a standalone android touchscreen
b.        User controls are:
i.        Climb
1.        User set height
2.        Parameter controlled climb speed
ii.        Land
iii.        Rotate
c.        User feedback
i.        Current height
ii.        Drone/battery status
d.        Assumes will use the mobile SDK
e.        Optional extensions would include communication with and control of the tether.

2)        Drone payload management from WITHIN the DJI flight controller
a.        Interface to BV payload on the drone
b.        Assumes will use the payload SDK
c.        Not sure how interface actually works on drone side
d.        Primary drone targets are M200/M300.  M600 is a bonus
e.        Controls include:
i.        Payload On/Off
ii.        Gimbal control (but not DJI gimbal, 3rd party gimbal)
iii.        Payload settings (assume 3-4 parameters are sent to the payload)
iv.        Payload feedback (temperature, and two others)
f.        Should show up on the standard DJI controller as a controllable unit

Mats Bohlinsson Posted at 6-19 00:47
You have to give a lot more info what your need is.

This include if the developers will be payed, platform, language, drone, location, remote work, and so on.

We are looking to hire (W2/1099) one or two developers for this effort.


1)        Drone control from minimal Android application.  This is for allowing a controlled ascent and descent for an M200/M300 which is on a tether (thus requires specific defined parameters on the climb)
a.        Control system is a standalone android touchscreen
b.        User controls are:
i.        Climb
1.        User set height
2.        Parameter controlled climb speed
ii.        Land
iii.        Rotate
c.        User feedback
i.        Current height
ii.        Drone/battery status
d.        Assumes will use the mobile SDK
e.        Optional extensions would include communication with and control of the tether.
2)        Drone payload management from WITHIN the DJI flight controller
a.        Interface to BV payload on the drone
b.        Assumes will use the payload SDK
c.        Not sure how interface actually works on drone side
d.        Primary drone targets are M200/M300.  M600 is a bonus
e.        Controls include:
i.        Payload On/Off
ii.        Gimbal control (but not DJI gimbal, 3rd party gimbal)
iii.        Payload settings (assume 3-4 parameters are sent to the payload)
iv.        Payload feedback (temperature, and two others)
f.        Should show up on the standard DJI controller as a controllable unit

CarlM000 Posted at 6-21 06:41
There are 2 parts:

1)        Drone control from minimal Android application.  This is for allowing a controlled ascent and descent for an M200/M300 which is on a tether (thus requires specific defined parameters on the climb)

Clear. I can not help as I am a developer of the IOS platform.

Maybe we can help you finish it！but we are in China ，if that donot bother  you，here is my Email lk.880311@163.com