Mattomstormy
lvl.1
United States
Offline
|
DJI Wanda Posted at 7-19 23:16
Hello, Mattomstormy. I would like to tell you that the active track can be used only when RSC2 matches with Raveneye. I am afraid that only using the devices you said can not fully perform the function. As for the second question, please configure the DJI RSC 2 as follows: In the image transmission interface in the Ronin app, click the settings icon in the upper left to enter the settings page, tap Shutter , and then select Shooting.
thank you for the quick response and information, I do actually have another question and i am probably configuring something incorrectly, i have used two configurations so far with the setup i am using.
Setup 1. Sony A6600, Ronin RSC2
connection USB C to Multi cable number 3, connected from DSS port to Sony A6600
with this setup I can control ISO, shutter, and other camera functionality through the Ronin RSC 2 on the small screen
Setup 2. Sony A6600, Raveneye, RSC2, and mobile device
with this setup using the USB C to Sony cable 4 i have video, active track, force mobile etc, but cannot control any of the camera functionality (ISO, shutter etc,), if i change cable 4 to cable 3 i lose video but gain camera functionality.
please let me know if i am doing something incorrectly with the hookup and or cable routing, or if there is a resource that will help me overcome this problem.
thank you for your time,
Matthew |
|