My firmware for P330CB is 1.0.2.8 the phantom apps show the latest version is 1.0.2.7
My firmware for Battery is 1.0.0.8 whereas I heard the latest is 2.6.0.0

I have no issue with my phantom just get a little lost on the firmware issue

I am using a mac and have the latest phantom apps

Use the newes Assistant Version.

How are your V+ batteries only on 1.0.0.8 ?
My V+ bought in July had batteries at 2.0.0.0 (all 3 of them) and now are all 2.6.0.0

Central Board Firmware Downgrade to v1.0.2.7 is just to solve some "No intelligent smart battery" issues.
And your battery just don't need to upgrade for now~
Nothing wrong, don't worry!

DJI-Autumn;-) Posted at 2014-11-27 14:05
Central Board Firmware Downgrade to v1.0.2.7 is just to solve some "No intelligent smart battery" is ...

I do not understand ? mine phantom is the latest ver 3.0 and if I do nothing will the battery discharge by itself on the 10th day ? if not what can I do to upgrade my battery to 2.6.0.0

cheong Posted at 2014-11-27 19:20
I do not understand ? mine phantom is the latest ver 3.0 and if I do nothing will the battery disc ...

Hi cheong, your battery is the V2.0 battery, which already enjoy all of the new version features.

DJI-Sophie Posted at 2014-11-27 20:12
Hi cheong, your battery is the V2.0 battery, which already enjoy all of the new version features.

Sophie, I updated a Phantom 2 ... did all upgrades as the software suggested, now aircraft will not start motors. When I try to CSC to start motors I get 5 red flashing light and nothing happens. I updated the battery. ONLY have 1 battery. Battery is 2.6.0.0 and loader is 1.5.0.0 .. Also I upgraded TX and think it loaded wrong firmware to TX. If you look at my posts you will see my current firmware programming and software I am using but I can tell you the Assistant software is version 3.06 but maybe I loaded the firmware with 3.04 version software. I have both on my computer. Also battery is on 4 th charge only and is at 90% plus charge about 12.2 volts.

lvlr_wright Posted at 2014-12-1 20:13
Sophie, I updated a Phantom 2 ... did all upgrades as the software suggested, now aircraft will no ...

Hi, the lastest Assistant software is V3.6, so if you are using the V3.4, please download the V3.6 and re-load all the firmware. Also, is there any error message when you connected to the Assitant software? Also, if your firmware is an old version, then there is no need to upgrade it's firmware.

Hi,
Newbie here, just purchased a phantom Vision 2+ last week (with the non scroll wheel controller).
I have updated all the firmware / upgrades to the versions as shown on the attached pictures.....
However, I have two batteries and both now report they have a battery error (non intelligent type fitted).
What have I done wrong.... or is there a bug in the software/ firmware downloads?
How do I sort it?
Thanks for your replies in advance..... as I said I am a newbie, so do not profess to know everything.

[img]https://forum44.djicdn.com/data/attachment/forum/%5BURL=http://s1004.photobucket.com/user/KevCaine/media/BatteryProblem_zpsefa0e2b5.jpg.html%5D[/URL][/img]

DJI-Sophie Posted at 2014-12-2 17:21
Hi, the lastest Assistant software is V3.6, so if you are using the V3.4, please download the V3.6 ...

I used the 3.06 assistant, NEW RC Assistant also. Done all calibrations. basic, advanced, compass, rc unit. I have tried 100 times to calibrate everything. Nothing, think I need to change firmware in transmitter. It had a red light on transmitter, now light is green. 3 beeps when you turn the transmitter on. then solid green light. Sticks work perfect with rc assistant and phantom assistant software calibrations but this radio is OLDER version with white plastic slider on the back panel. I loaded the NEWEST firmware to it. Am not sure of the firmware version number but it said for NEW Transmitter only when looking at it again. PLEASE HELP

:@   I m tired of messing with this

MY PT2 have the same message :@
Could you tell my how to downgrade P330CB back to 1.0.2.7