DJI Stephen Posted at 8-18 21:18
Hi there Frontliner 2020. Thank you for the reply and you are very much welcome. Have a safe and a happy flying always.  .

you are welcome...

djiuser_j0fPT46NRS1l Posted at 8-19 00:52
Why do i get laging and the occasional crash with my air 2 s. Ever since the last update. Will this problem be fixed on the next update?

Are you using fly app 1.4.8?
If you are try going back to 1.4.4 abd see if it makes any difference.

Avatargood Posted at 8-18 11:18
Hello.
After the update, error 30064 appeared, the drone does not take off.
What should I do in this case?

I have the same error

I have an error 30068  after update firmware. Drone doesn’t take off. Also indicated 30016 error and 180037 error

My drone hit the wall himself.... its Really amazing. After the last Update, i start to fly- turning back ( just pushed left joystick on the right , he started to turning on 180 grad, then he just starting fly on the left side , and hit the wall.  After  i get vision sensor error :Code: 180043. I already taked in contact with  support. I will send it for verification , and analysis. will see what happened....

Miguel Leitao Posted at 8-20 06:57
Are you using fly app 1.4.8?
If you are try going back to 1.4.4 abd see if it makes any difference.

I am using 1.4.8 (1185) i was using (1120) seems to have improved a fair bit. no more app crashes at least. Just a bit of lag.

DJI Stephen Posted at 7-27 21:10
Hello there Frontliner 2020. You are very much welcome and if you have any inquiries with regards to this new update. Please feel free to post it here at DJI Forum. We are all here to help and assist you. thank you.

Stephen,

Can you advise how I can configure my Air 2S to less than 9 days. 9 days is dangerous and damaging to the batteries. 5 days was already too long 12hours would be appropriate at a max delay.

Can you also advise why this change was made to what end. Damaging everyones batteries is only driving battery sales.
  

Help! I just activated my new Air2S and I cannot take off, or do much of anything. The drone is stuck and will not let me update anything, when I am connected with the remote the software gives a timeout message when trying to manually update my firmware. I also connected with USB on DJI Assistant and it gives me a similar server error. It's like it's rejecting server access internally. Is there a way to manually hard reset the drone via button press/hold or hidden reset that doesn't require DJI Assistant?
   

Possibly it could be telling the truth.......there may be a network error at the router (or beyond) at your end.  The first one relates to WiFi the second to the network, i.e. the router itself.  Any trouble by chance with other devices and your network/WiFi?   Or is it just this WiFi device and app (DJI Assistant)?  And do you have it connected by cable to the computer?  Edit---I see now you did say USB.....

My name is Nathan I am from Herndon Virginia, Can you guys please make it possible that while flying we can stream live via Facebook and YouTube just like Mavic pro 2 . Please make it possible so we can enjoy more the DJI Air2s .

Hi, I am using air 2s. I take off after RTH is determined, it does not allow me to go above 30 meters. After down it again and turning off the device and the remote, I can fly normally when I turn it on and take off again. I experience this at every departure point. I've looked through all the settings and can't find a setting that solves this. I did not have such a problem with Mavic 2 pro. Is there anyone who can help? Thanks.

Please make tripod available, or at least control spedd on cinemode, its very fast to do slow  movements...

DASPhotos Posted at 9-10 03:27
Hi, I am using air 2s. I take off after RTH is determined, it does not allow me to go above 30 meters. After down it again and turning off the device and the remote, I can fly normally when I turn it on and take off again. I experience this at every departure point. I've looked through all the settings and can't find a setting that solves this. I did not have such a problem with Mavic 2 pro. Is there anyone who can help? Thanks.

This may sound obvious, but have you checked the max altitude in the Fly app during each pre-flight.....sometimes I've seen mine seem to change on its own.

Having problems to connect to my pc after a firmware update… help me please

djiuser_j0fPT46NRS1l Posted at 8-30 02:33
I am using 1.4.8 (1185) i was using (1120) seems to have improved a fair bit. no more app crashes at least. Just a bit of lag.

Where did you get 1185 from? When I download the file name still says 1120. Didn't they update the file name to correspond to the version?

doglaboi Posted at 9-25 14:10
Where did you get 1185 from? When I download the file name still says 1120. Didn't they update the file name to correspond to the version?

Here - https://drive.google.com/drive/u ... pW_LB7UDL6GevH4WVg5

Use the last one.

Thanks for the download, are these official DJI downloads? 4 different 1.4.8 versions and still not working correctly???

doglaboi Posted at 9-26 02:50
Thanks for the download, are these official DJI downloads? 4 different 1.4.8 versions and still not working correctly???

I haven't tried the others, but the 1185 version has official after the numbers once installed. It is a beta version. It does work better than the others.

Can we get active track with dlog please.  The performances of active track is so amazing it’s a shame we can’t use it professionally because it can’t shot dlog.

Will DJI Fly do all the updates including firmware we need? Some of the material makes it seem we need DJI assistant 2?

I know this has already been asked but there has been no response so I’m going to ask again.
Why change auto discharge of the battery to start after 9 days?!! Everyone who knows anything about LiPos knows that 5 days is too long!!! It should be up to the user and be adjustable as is in Go4. This is a good way to loose customers.  

Anyone have any advice on how to enable Touch Screen gimbal controls one Air 2s? I have a Samsung S21 Ultra but no ability to control gimbal with screen. Only with the wheel. If I touch the screen it tries to go into tracking mode. Thank you in advance

I downloaded firmware on the morning of 10/8/2021 and haven't been able to view videos or pictures since...

I spent all day trying different things...  

I downloaded new firmware the morning of 10/8/2021 and haven't been able to view a video since...
Codec problems, several different computers say...

thanks for the info!

Why would I want to take a chance of updating , when my done is fine? Seems kind of silly to take a chance of screwing it up with a update that I'm not getting much out of.

I've not updated since I bought my air2s the day it came out and I've had no problems.  Why would I want to update, I don't like to fixing things that aren't broke

New air 2s firmware v02.04.2080 just released.   Fixes flight safety issues

DASPhotos Posted at 9-10 03:27
Hi, I am using air 2s. I take off after RTH is determined, it does not allow me to go above 30 meters. After down it again and turning off the device and the remote, I can fly normally when I turn it on and take off again. I experience this at every departure point. I've looked through all the settings and can't find a setting that solves this. I did not have such a problem with Mavic 2 pro. Is there anyone who can help? Thanks.

hello. i have the exact same  error.   brand new 2S ,made he firmware update, and I have te same error... no mor than 30 m.    what can I do?   Did you fix it yours? thank you