Hello guys,
I have recentlly built a drone using a F450 frame and dji naza m lite with gps kit,2200mah 3s lipo,30amp esc and racestar 980kv motors
This is my very first build but I am very dissapointed as it is not stable at all.
Whenever I take off after about 10seconds it losses altitude and begains to drop to one side and becomes extremely uncontrollable at least for me because I am a beginner.
I have done all sorts of calibrations like gps and IMU calibration multiple times but no luck.
I even removed the gps module thinking that it might be causing the problem but even in altitude hold mode it does the exact same thing, I even changed the motors to the one I have mentioned ( I was using a non branded yellow coloured motors) but even after that same problem, I know I have done something wrong or missed someting but I can't figure out what I missed. Please help
open to any suggestions!

Hello guys,
I have recentlly built a drone using a F450 frame and dji naza m lite with gps kit,2200mah 3s lipo,30amp esc and racestar 980kv motors
This is my very first build but I am very dissapointed as it is not stable at all.
Whenever I take off after about 10seconds it losses altitude and begains to drop to one side and becomes extremely uncontrollable at least for me because I am a beginner.
I have done all sorts of calibrations like gps and IMU calibration multiple times but no luck.
I even removed the gps module thinking that it might be causing the problem but even in altitude hold mode it does the exact same thing, I even changed the motors to the one I have mentioned ( I was using a non branded yellow coloured motors) but even after that same problem, I know I have done something wrong or missed someting but I can't figure out what I missed. Please help
open to any suggestions!