hey guys,

here is what I have

• custom drone using vista
• both googles factory reset before testing
• this mean pilot transmission is at 25Mbps
• both goggles are V01.00.0606
• both goggles are V2
  

I see image on goggles #1
I turn on goggles #2 and go into audience mode and only see channel 1,2 and 3 and can not select them.
that's it, does not work. I factory reset both goggles and even switch to DJI FPV drone and when back FPV and reset everything again.


I wanted to try V01.00.0600 since I think that would work. I have a friend that is on 600 and it works. I read comment online of other user that are using 600 and seem to have it working. But from what I read online, audience mode is not perfect and is a hit and miss.


Thanks for reading hope you can help.

here is something interesting

googles #1 (my drone)
I see 8 channels in player
I see 8 channels in audience mode

googles #2
I see 4 channels in player (ch1,2,3 and 8)
I see 3 channels in audience (ch1,2 and 3)

so I got this working, the issue was with the naco_pwr.txt and naco.txt hack

to make mine work, I only use the naco.txt and wrote 2 (canada) and that did the trick.

my googles #1 are pilot
googles #2 are the audience

the googles #2 had 4 channels so I had to make sure my vista had FCC canada where this one use 4 channels. I had it at 8 channels.

Hi, does that mean your Goggles #2 are from a different county and can only be used on 4 channels forever?

It seems like you made the adjustment only on the caddx vista air unit? Does your Goggles #2 now show all 8 channels?

socaldjiuser Posted at 3-29 08:59
Hi, does that mean your Goggles #2 are from a different county and can only be used on 4 channels forever?

It seems like you made the adjustment only on the caddx vista air unit? Does your Goggles #2 now show all 8 channels?

Hey,
it's been a while and I was able to get it working but don't use it since quality is bad and not easy to setup.
I got a raspberry pi and use digiview or cosmostream to get the footage on a HDMI monitor in the best quality possible.

thanks

Yes the HDMI out via Raspberry Pi or the other methods from a PC work for great quality, but really missing that portability factor/impress your friends factor. I'm surprised you said the quality is bad? Why is that? It looks fantastic I just fixed it on my end.

I had to pair the Goggles that had only 3 channels with the DJI air unit, that fixed it to 8 channels (I'm assuming it switched it from Canada to USA). Then BOTH of my Goggles shows 8 channels on them. Then I joined one to a non-public channel (channel 1) and I had to wait about 30 seconds then I could join from the other pair of Goggles and it looks fantastic.

socaldjiuser Posted at 3-29 09:26
Yes the HDMI out via Raspberry Pi or the other methods from a PC work for great quality, but really missing that portability factor/impress your friends factor. I'm surprised you said the quality is bad? Why is that? It looks fantastic I just fixed it on my end.

I had to pair the Goggles that had only 3 channels with the DJI air unit, that fixed it to 8 channels (I'm assuming it switched it from Canada to USA). Then BOTH of my Goggles shows 8 channels on them. Then I joined one to a non-public channel (channel 1) and I had to wait about 30 seconds then I could join from the other pair of Goggles and it looks fantastic.

when sharing it's 25Mb/s on my goggles and my spectator goggles
not 50Mb/s

what about you?

thank you