Please select Into the mobile phone version | Continue to access the computer ver.
Pan Axis clamps cant be tight enough..? DJI Ronin
993 2 2015-7-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
ralph
lvl.1

Netherlands
Offline

Hello,
My Ronin keeps slipping in the pan axis when i go from lowmode to uprightmode and vice versa. Ive tried to tighten the screws on the clamps, but it doesnt seem to make any difference, its still slipping back and forth. Not a good feeling when having your gear on the gimbal. I have asked this before and thought i had resolved by dismounting the screws all the way end remounting them. But now its happening again. It seems like no matter how tight i screw them the block on the inside of the rail doesnt seem to have enough clamping power..
Here is a video:

Any way to resolve this?

Thanks in advance!


2015-7-26
Use props
ralph
lvl.1

Netherlands
Offline

Hey people from DJI, why is it that u reply all the posts that came after this one but not this one? Do you want me to repeat this open thread, because this is how i'm going to repeat this thread..
2015-7-27
Use props
ralph
lvl.1

Netherlands
Offline

ralph@sarmeaux. Posted at 2015-7-28 06:46
Hey people from DJI, why is it that u reply all the posts that came after this one but not this one? ...

Still no reply? Frustrating..
2015-8-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules