Hi Everybody.
Just got my new DJI Mini 2.
I'm setting it up.  Everything is working fine, except:
When I start the IMU calibration it freezes at 95%.

How do I get past this?
Thank You in advance for helping you.
Larry

Hello there Larry. I am sorry for the trouble this has caused and thank you for reaching out. Before this issue happened was there a hard landing or a crash that happened to you DJI Mini 2? In addition, please try to re calibrate the IMU of the said DJI drone. When doing the calibration please remove keys, watch, metal frame glasses, coins, etc. Then move away from any metal objects like cars, and then do the calibration. Please keep us posted for further assistance. Thank you.

DJI Stephen Posted at 8-30 19:16
Hello there Larry. I am sorry for the trouble this has caused and thank you for reaching out. Before this issue happened was there a hard landing or a crash that happened to you DJI Mini 2? In addition, please try to re calibrate the IMU of the said DJI drone. When doing the calibration please remove keys, watch, metal frame glasses, coins, etc. Then move away from any metal objects like cars, and then do the calibration. Please keep us posted for further assistance. Thank you.

DJI Stephen,
Thank You for your response.  All is good now.  This morning I was out in an open field and tried the IMU calibration.  It worked fine.  Yesterday morning when the calibration locked up the mini 2  was at home on a small patio with the mini 2 in the middle of a glass top metal framed table.  This is all new to me, so I'm learning.  Thank you for helping me speed up my learning curve.

Sincerely,
Larry

ldhflyguy Posted at 8-31 11:17
DJI Stephen,
Thank You for your response.  All is good now.  This morning I was out in an open field and tried the IMU calibration.  It worked fine.  Yesterday morning when the calibration locked up the mini 2  was at home on a small patio with the mini 2 in the middle of a glass top metal framed table.  This is all new to me, so I'm learning.  Thank you for helping me speed up my learning curve.

Hi there Larry. You are very much welcome and it is great to know that everything is now working. If you have any other concerns or any inquiries with DJI. Please feel free to post it here at DJI Forum. We are all here to help and assist you. Thank you and keep flying. .

ldhflyguy Posted at 2021-8-31 11:17
DJI Stephen,
Thank You for your response.  All is good now.  This morning I was out in an open field and tried the IMU calibration.  It worked fine.  Yesterday morning when the calibration locked up the mini 2  was at home on a small patio with the mini 2 in the middle of a glass top metal framed table.  This is all new to me, so I'm learning.  Thank you for helping me speed up my learning curve.

Hello!
Same problem here, I have a DJI Air 2s, no crash, and the IMU calibration is stuck at 95%
I have tried everything but no luck.
Drone is not taking off due to required IMU calbration

djiuser_vXQZdVK5v0se Posted at 5-11 07:31
Hello!
Same problem here, I have a DJI Air 2s, no crash, and the IMU calibration is stuck at 95%
I have tried everything but no luck.

Same with my, stops at 95% (2/5)

Like the rest of the app, though it represents a lot of difficult work, the user interface for the IMU calibration needs more polish.

The calibration tool displays a diagram of how you're supposed to place the drone on a level surface, then you begin the calibration Step 1.

When you start the IMU calibration, it will go up to 95% no further, showing "Step 2". The drone's lights start blinking green.

What nobody tells you is that you're now supposed to reposition the drone for each step. The diagram has been stealthily switched to show a new orientation, but I didn't notice; and if you're reading this, you didn't notice either.

Each time the drone lights flash green, you'll need to reposition the drone to continue the next step.

Good luck.

Arya Irani Posted at 8-15 06:51
Like the rest of the app, though it represents a lot of difficult work, the user interface for the IMU calibration needs more polish.

The calibration tool displays a diagram of how you're supposed to place the drone on a level surface, then you begin the calibration Step 1.

Hi there,
thank you for reaching out.

We are grateful for the information shared with us and the rest of the DJI Forum community.

Should you have any other questions, kindly message us for assistance. Thank you.