Hi Forum, Im trying to connect to my RavenEye through my phone(huawei p40 lite, i also have an Iphone 8+, Samsung a30 and a30s) but the printed password doesn't work. the wifi network shows up on all my phones except when I try to reset, the raveneye is blinking with 3 white lights. I've also tried to connect on my pc with a dualband usb module and thats a no go.

raven info ssid "RavenEye-6685E8" pass "DJI44221B".

Might II have the wrong password printed on my RavenEye!? I guess a simple solution would be, RESET IT! but when I do just that, it just wont show up on my wifi network. so with that being said I haven't been able to reset the12345678 password to connect via wifi. I want to mention that the photo Included is with the module standalone , however I have also hook it all up to the RS2C as some threads suggest and the manual but it is also a no go and I have the same case. Cant connect nor can I RESET IT.

Any suggestions or ideas greatly appreciated. Thanks!
Also Im coming from reading a few threads and Ive tried a few of the other solutions, just got my ronin no even a month ago. PLEASE HELP!

Hello, to reset, you need to press the power button 6 times in quick succession in the power-on state.

Gd小猪 Posted at 9-23 18:49
Hello, to reset, you need to press the power button 6 times in quick succession in the power-on state.

Yes, this is what I do.
1. Power on, starts blinking 3 white lights and 1 red.
2.  press the power button 6 times in quick succession.

Wait and nothing happens.

Angel_Ayala Posted at 9-26 22:25
Yes, this is what I do.
1. Power on, starts blinking 3 white lights and 1 red.
2.  press the power button 6 times in quick succession.

If three lights are flashing, you can connect app to upgrade firmware.

Gd小猪 Posted at 9-27 03:32
If three lights are flashing, you can connect app to upgrade firmware.

This is what I am asking for help, as at this point I cannot connect to via wifi nor via app.

Angel_Ayala Posted at 9-27 07:26
This is what I am asking for help, as at this point I cannot connect to via wifi nor via app.

Long press the power button for 15 seconds, restart to see if you can connect

Hey

Im having a problem connecting to RAVEN EYE.

I can't even save the custom password on DJI App after resetting the password on the Raven eye.

can you help?

Angel_Ayala Posted at 2021-9-26 22:25
Yes, this is what I do.
1. Power on, starts blinking 3 white lights and 1 red.
2.  press the power button 6 times in quick succession.

Finally! None of the instructions were clear. This helped. I might have had to mash the power button more than six times. Or to try it a few times. But this worked. Likewise I had no password on the device and couldn’t get it to reset. This worked.