Please select Into the mobile phone version | Continue to access the computer ver.
Side to Side or Left to Right Camera Movement Issue
734 5 2021-10-20
Uploading and Loding Picture ...(0/1)
o(^-^)o
CineAir Chicago
lvl.2
United States
Offline

I have a problem with my RS2 fx3 Zeiss batis lens, all perfectly balanced and checked in-app and on gimbal.... Perfect....
When I am walking with it underslung, meaning horizontal to the ground one hand on the tilta handle and the other on the legs the camera will start to move from left to right when I walk, No matter how slow or smooth I walk. I tried every setting I can think of, I am not a novice I have had ronins from almost day one. I also have a Movi Pro.
I have locked off pan or roll and both,
So what do I need to do to get rid of this left-right camera movement?
Here is a clip.
https://vimeo.com/636751439
any help would be greatly appreciated
Thank you
2021-10-20
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi there, please click "Status" > "System Calibration" in the Ronin app to perform a system calibration to see if it helps. And please click "Auto Tune" on the DJI RS 2 touchscreen to perform a gimbal auto check. If you put the RS2 on a flat table, will it also do the same itself?
2021-10-20
Use props
CineAir Chicago
lvl.2
United States
Offline

DJI Mindy Posted at 10-20 20:33
Hi there, please click "Status" > "System Calibration" in the Ronin app to perform a system calibration to see if it helps. And please click "Auto Tune" on the DJI RS 2 touchscreen to perform a gimbal auto check. If you put the RS2 on a flat table, will it also do the same itself?

Hi and thank you.
I have done this, reset, calibration, endlessly balanced, etc with no success. I am hoping it is a settings thing that I can change, where I don't know which or what to set to correct the issue?
2021-10-21
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

CineAir Chicago Posted at 10-21 07:21
Hi and thank you.
I have done this, reset, calibration, endlessly balanced, etc with no success. I am hoping it is a settings thing that I can change, where I don't know which or what to set to correct the issue?

Thanks for the update. Could you please tell us if you put it on a table and do not touch it, will the issue still exist? You may also refresh the firmware for a check. If the issue still exists, please provide us with a video of the gimbal movement for further confirmation. https://www.dji.com/rs-2/downloads
2021-10-21
Use props
djiuser_B3A0I4sPrgf4
New

United States
Offline

CineAir Chicago Posted at 2021-10-21 07:21
Hi and thank you.
I have done this, reset, calibration, endlessly balanced, etc with no success. I am hoping it is a settings thing that I can change, where I don't know which or what to set to correct the issue?

I have the same problem with my rs2. Just curious, I did the same thing and still have the same issue. Did dji resolve your issue?
11-19 12:49
Use props
George_P
lvl.2
Russia
Offline

RE: Side to Side or Left to Right Camera Movement Issue [[url=]Modify[/url]]
djiuser_B3A0I4sPrgf4 Posted at 11-19 12:49
I have the same problem with my rs2. Just curious, I did the same thing and still have the same issue. Did dji resolve your issue?



What is the following speed set on the PAN axis? Can you attach a screenshot of the motor power settings? Do you use the autotune of the power of motors?
11-24 23:51
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules