I am flying an inspire 2 around power lines and am having issues where the drone looses connection, returns to home, and than does not relink. The relink light on the side of the drone is off. Is there a way to restart the drone so that this can be linked again without sending it in?

Hello there. I am sorry for the trouble this has caused and thank you for reaching out. Kindly please try to fly your DJI drone to a different location to see if the issue will still persist and please be mindful of the location where steel structures and power lines are located when flying your DJI drone to avoid any unwanted issues. These power lines can caused signal interference when flying your DJI drone. Thank you.

the drone will not re connect to the controller and the status connection light on the side of the drone is not working. is there a way to reset the drone so that it will connect again. the drone will also not connect to dji assistant.

aerial josh Posted at 10-27 23:15
the drone will not re connect to the controller and the status connection light on the side of the drone is not working. is there a way to reset the drone so that it will connect again. the drone will also not connect to dji assistant.

Hi, there. Could you provide us with a video of this issue to do a confirmation?

Besides, If the drone doesn't connect to DJI Assistant 2, you can try steps below:
1. Try another connecting cable, make sure that you have powered on the drone when connecting;
2. Reinstall the DJI Assistant 2, note to download the app on the corresponding product page on the DJI official website, try to disable signed driver enforcement;
3. Try another PC if possible.
Hope this helps.