Added photo capture, video recording, camera settings, autofocus, and focus pull support for Panasonic GH5 M2 cameras with supported macro 4/3 mount lenses using Multi-Camera Control Cable (USB-C). To use autofocus on Panasonic GH5 M2, press halfway down on gimbal camera control button.
Added ActiveTrack for Panasonic G9, GH5S, BGH1, and GH5 M2 using Multi-Camera Control Cable (USB-C). Latest camera firmware version is required, which can be downloaded at https://av.jpn.support.panasonic ... download/index.html
Fixed issue: could not control some cameras after hot swapping camera control cable.
Optimized FPV mode settings.
Notes:
Motor parameters are reset after updating firmware. Make sure to autotune DJI RSC 2.
Make sure that the DJI Ronin app is the latest version when updating the firmware.
Update the firmware using the DJI Ronin app by connecting the DJI RSC 2 via Bluetooth. Do not disconnect the DJI Ronin app and DJI RSC 2 during the update process.
Update the firmware for the DJI RavenEye Image Transmission System using the DJI Ronin app by connecting the RavenEye via Wi-Fi. Do not disconnect the DJI Ronin app and DJI RavenEye Image Transmission System during the update process.
If DJI RSC 2 has a camera attached and is powered on while updating the firmware, make sure to protect the camera and lens as the motors will power off during the update.
If the firmware update fails, restart DJI RSC 2 and retry.
What is the addition of active track to these camera means?
The same like with raven eye just without the raven eye ?
If so, how to use it? I have updated the camera to the latest firmware.
Moshe.mmm Posted at 12-1 10:31
What is the addition of active track to these camera means?
The same like with raven eye just without the raven eye ?
If so, how to use it? I have updated the camera to the latest firmware.
I have no RSC2, so I can't help you, but I guess it will combine the feed from the camera with moving the head so it stays in the same spot.
On the last one, with Orbit Follow enabled, PF mode, speed set to 10, deadband to 3 - operating the thing felt almost like operating the glidecam. You could get really smooth and intuitive pan following.
You could easily walk around the subject and pan follow would work just great. Orbit shots felt perfect.
Now it is all jerky. Enabling Orbit Follow seems to do nothing!
With this firmware, on the pan axis you get around 20-30° of rotation before it moves like on sport mode. It feels awful.
On the firmware before you could rotate it 90° or more while walking and it would progressively move acordingly...
What is happening?
I've switched firmwares few times and can confirm that on the latest one pan axis just feels awful, no matter the settings..
On the last one, with Orbit Follow enabled, PF mode, speed set to 10, deadband to 3 - operating the thing felt almost like operating the glidecam. You could get really smooth and intuitive pan following.
I have the exactly same problem and I roll back the firmware too.
I don't really use FPV mode personally, so the 'Optimized FPV mode settings' seem redundant for me. I see a few unhappy people about this FW. I really wanted the gimbal to charge my A6500 while in use....
bbvr Posted at 1-9 18:03
There is no Android DJI App for the Ronin RSC2 on the Google Play Store.
So then how to update the firmware?
The latest firmware (1.04.00 for the rsc-2 is pulled down for a while. According to the customer service they are optimizing it before they release it again. The app can be found at the dji download center. Search for ronin app.