Added photo capture, video recording, camera settings, autofocus, and focus pull support for Panasonic GH5 M2 cameras with supported macro 4/3 mount lenses using Multi-Camera Control Cable (USB-C). To use autofocus on Panasonic GH5 M2, press halfway down on gimbal camera control button.
Added video recording, camera settings, autofocus, and focus pull support for Panasonic BS1H cameras with supported L-mount lens using Multi-Camera Control Cable (USB-C). To use autofocus on Panasonic BS1H, press halfway down on gimbal camera control button.
Added ActiveTrack for Panasonic G9, GH5S, BGH1, BS1H, and GH5 M2 using Multi-Camera Control Cable (USB-C). Latest camera firmware version is required, which can be downloaded at https://av.jpn.support.panasonic ... download/index.html
Added photo capture, video recording, camera settings, autofocus, and focus pull support for Nikon Z9 cameras with supported Z-mount lens using Multi-Camera Control Cable (USB-C). To use autofocus on Nikon Z9, press halfway down on gimbal camera control button.
Fixed issue: could not control some cameras after hot swapping camera control cable.
Fixed issue: could not set follow speed when using Panasonic cameras with DJI Ronin RavenEye Transmission System.
Optimized FPV mode settings.
Notes:
Motor parameters are reset after updating firmware. Make sure to autotune DJI RS 2.
Make sure that the DJI Ronin app is the latest version when updating the firmware.
Update the firmware using the DJI Ronin app by connecting the DJI RS 2 via Bluetooth. Do not disconnect the DJI Ronin app and DJI RS 2 during the update process.
Update the firmware for the DJI RavenEye Image Transmission System using the DJI Ronin app by connecting the RavenEye via Wi-Fi. Do not disconnect the DJI Ronin app and DJI RavenEye Image Transmission System during the update process.
If DJI RS 2 has a camera attached and is powered on while updating the firmware, make sure to protect the camera and lens as the motors will power off during the update.
If the firmware update fails, restart DJI RS 2 and retry.
I really hope that they just didn't test it. On the other hand, I'm afraid that they will leave it like this and then release new RS3/RSC3 that will "fix" the problems...
firmware 1.05
in menu, is the mode steadycam option enable? because when it is enable pan axis speed is modified (speed can't be change it follows you like it is locked). perhaps it is your problem so disable it and see if that resolve your problem. i found this option very usefull when we do very quick mouvement, When enable, we dont need push M button anymore to have same quick mouvements. To me everything run normally in firmware 1.05.