tkippie
New
Australia
Offline
|
Hi Everyone
This is my first post and hope it will make sense.
I have searched Google/Youtube but no answers found about the issue I have with my DJI Spark
I had a crash and broke the frame...losing the housing and 1 motor.
Found the drone and everything was working (Video feed, GPS) except it obviously could not take off without the 4th motor assembly.
I ordered a replacement frame, new motor and esc along with some extra bits and bobs
Followed the Youtube tutorials about replacing a motor and followed everything to the T
Long story short, new motor and all the other bits transferred to the new body shell and assembled.
Now when I turn the drone on, it powers up (Fan starts spinning) but nothing initialises. The esc LED's do not come on and it beeps all the time.
After about a minute the fan stops and then starts up again. Checked to see if an of the esc's got hot....none do.
The motor /blades twitch upon every beep. I triple checked all the connections and fittings and I believe I have not missed anything.
If someone could advise what the cause could be, I would appreciate the advise.
....and no it is no longer under warranty :-(
Thanks everyone in advance
Video attached of the startup and beeping
https://www.dropbox.com/s/vk1ku49uzmk3p02/Dji%20Spark-1.m4v?dl=0
|
|