Please select Into the mobile phone version | Continue to access the computer ver.
RC Pro Needs Calibration
527 9 2-19 11:22
Uploading and Loding Picture ...(0/1)
o(^-^)o
roamer105
Second Officer
Flight distance : 3156145 ft
  • >>>
United States
Offline

I am wondering about this occasional start-up condition with my RC Pro indicating that it needs calibration. I go through it and it completes fine and works fine. Yet a few days later it comes up with the same condition and again, calibration works and finishes OK.

Anyone else with this issue?

I did notice during the calibration of the left stick, the "down" value is "noisy" which means just keeping it in the center position, I can see the down value randomly change from 0 to -1 and back. The right stick does not do that.
2-19 11:22
Use props
frankymusik
Captain
Flight distance : 24791988 ft
  • >>>
Germany
Offline

That could actually just be a hardware error...
Warranty case...
2-20 09:18
Use props
roamer105
Second Officer
Flight distance : 3156145 ft
  • >>>
United States
Offline

frankymusik Posted at 2-20 09:18
That could actually just be a hardware error...
Warranty case...

I know but I am very hesitant to get this RC Pro replaced given the connection horror stories I hear. I have no issues with this one maintaining connections way beyond every controller I used before with my Air2s. So, unless it is getting worse I will wait.
2-20 09:25
Use props
Mobilehomer
First Officer
Flight distance : 2456178 ft
United States
Offline

Have you tried spraying a little contact cleaner down into the gimbal?
2-20 10:22
Use props
RobZilla
First Officer
Flight distance : 228550 ft
United States
Offline

Confused, are you using the smart controller or the RC Pro? Subject says smart controller.
2-20 11:35
Use props
roamer105
Second Officer
Flight distance : 3156145 ft
  • >>>
United States
Offline

RobZilla Posted at 2-20 11:35
Confused, are you using the smart controller or the RC Pro? Subject says smart controller.

Sorry about that. RC Pro.
2-20 15:50
Use props
frankymusik
Captain
Flight distance : 24791988 ft
  • >>>
Germany
Offline

I tested this on my RC Pro today...
Some movements of the sticks only show "99%" for me, not quite 100...
But I assume that this should not have any meaning in practice!
The "noise" of the values shouldn't really be a problem for practical use.
Of course, it's annoying when you get the message that you should (therefore) calibrate the controller again and again...
Something like this can also change with a different ambient temperature, since the electronic components are of course always temperature-sensitive! But it shouldn't be reported all the time - and I agree with you there...
2-22 04:45
Use props
frankymusik
Captain
Flight distance : 24791988 ft
  • >>>
Germany
Offline

Mobilehomer Posted at 2-20 10:22
Have you tried spraying a little contact cleaner down into the gimbal?

Never use contakt cleaner!
There are no "mechanical contakts" inside!!!
2-22 08:39
Use props
djiuser_PTYexkK1Fmzz
lvl.1
Flight distance : 209117 ft
Canada
Offline

I have had issues with this today. RcPro controller asking to be recalibrate with blue light on. All control sticks at 100% I had to turn unit off for @15 min then all was good. Will be sending back under warranty. F
6-11 09:50
Use props
djiuser_PTYexkK1Fmzz
lvl.1
Flight distance : 209117 ft
Canada
Offline

I'm interested if others are having the same issue.
6-11 10:03
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules