Our DJI RC Pro controller suddenly displayed "Code: 10087" warning indications, stating "internal storage severely fragmented, back up files and reformat internal storage." This warning appeared in the upper-left corner of the display, with a small orange dot (like the normal warning msgs that appear, pre-flight.)

It happened shortly after the RC Pro updated its Fly app. I don't remember seeing it before, but I can't say for sure.

I was unsure whether the warning pertained to the Mavic 3 CINE internal SSD, or the DJI RC Pro remote internal (20gb) storage. In order to rule out whether the warning pertained to the drone's internal 1TB SSD, I connected the drone to a PC and used Windows Explorer to reformat to exFat. Powered down the drone and the RC Pro. Powered them both up, again. The Code: 10087 warning persists. This led me to conclude, the Code: 10087 warning pertains to the RC Pro internal storage – not the Mavic 3 CINE internal SSD storage.

Confident the issue pertained to the internal storage of the RC Pro controller, I connected the RC Pro to the PC with the USB-C transfer cable; however, the volume (internal storage, RC Pro) does not allow for "optimizing" (Windows defragmentation.)

FWIW, I've used the drone/controller dozens of times since purchasing the CINE package when it launched in November. I've never seen this error. Firmware's always current. I don't use the RC Pro for any storage/transfer of footage filmed during flights. I've never actually put a SD Card in the controller. I only use the RC Pro for flight control.

• Has anyone experienced this Code: 10087 warning?
• Did it happen after updating the RC Pro app?
• How does one reformat RC Pro internal storage?
• After reformatting, how does one reinstall apps, folders, etc.?
• Is there a 'clean' way to copy/clone or backup RC Pro storeage?
• Should I do a "factory reset" on the RC Pro?
• Will a factory reset reformat the controller's internal storage?
  

I tried numerous Google searches, and subsequent searches here, in the DJI Forums. Haven't seen anything...

Thanks for any guidance or insight re. the Code: 10087 warning that appeared today on the RC Pro controller.

Flying/filming two projects tomorrow... hoping to sort this out!

Update: I ended up initiating a chat in Support, re. the Code 10087 warning message (severely fragmented internal storage.)

The tech person suggested I reformat the internal storage (CINE SSD) via RC Pro app (see screenshot, attached.)

Prior to talking with tech support, I had successfully reformatted the SSD via Windows PC; however, the warning message persisted.

The solution suggested by Tech Support (use the Fly app, via RC Pro, to reformat internal storage) worked – warning message no longer appears.

I wanted to update this post in case anyone else has this warning message appear on their RC Pro, with a Mavic 3 CINE internal storage issue.

ArtPeers Posted at 2-25 08:20
Update: I ended up initiating a chat in Support, re. the Code 10087 warning message (severely fragmented internal storage.)

The tech person suggested I reformat the internal storage (CINE SSD) via RC Pro app (see screenshot, attached.)

Glad you got the issue resolved in time for your commitment and thanks for sharing the solution.  

Yeah I got to the parking ramp (top level) in time to run a 30-seconds hyperlapse flight, 414' over US-131 Southbound. First day in a long time that the UAV app had the green light for flying... and it was a good one. Big thumbs up to DJI support for the quick response.

ArtPeers Posted at 2-25 08:20
Update: I ended up initiating a chat in Support, re. the Code 10087 warning message (severely fragmented internal storage.)

The tech person suggested I reformat the internal storage (CINE SSD) via RC Pro app (see screenshot, attached.)

I did the same thing. I formatted the ssd yet whenever I reach about 100gb the error shows face again.

Dallas Kappel Posted at 3-7 12:32
I did the same thing. I formatted the ssd yet whenever I reach about 100gb the error shows face again.

Just seeing your reply, Dallas – I came back to update that the error msg reappeared, for me. I did have a few days where it seemed to be resolved. Still no functional issues. But, when the warning msg reappeared, I did ask Support if they could send a replacement, so I could return this one.

Support said they can't send a replacement until they receive the defective one. (I think it'd be cool if they could make an exception for people who purchased the Refresh plan, who agree to a temporary 'hold' on $250 until the defective one arrives to DJI... but that's another topic, for a different thread.)

Question: did you ever have the warning msg. appear *prior to* installing the most recent firmware update? I think it was a late Feb. 2022 update. I owned this particular drone for one month before the late Feb. 2022 update, and I don't recall seeing the "Severely Defragmented" warning msg. prior to the most recent update. But, it's not really strong data, bc I haven't had the drone for super long, overall.

I do believe I will send this drone back, and get a replacement. I'm wrapping up a project so I couldn't do that sooner. I reformatted *again* last week and haven't had the warning msg. again, yet. Once it comes back, I'll arrange to send this one back. I'm really careful (using the UAV app) not to fly in adverse conditions outside of what the DJI manual specs.

So, unless it's a software glitch (false positive) it seems like there are potential issues with some SSDs. Will circle back once I have some kind of update.

ArtPeers Posted at 3-9 14:12
Just seeing your reply, Dallas – I came back to update that the error msg reappeared, for me. I did have a few days where it seemed to be resolved. Still no functional issues. But, when the warning msg reappeared, I did ask Support if they could send a replacement, so I could return this one.

Support said they can't send a replacement until they receive the defective one. (I think it'd be cool if they could make an exception for people who purchased the Refresh plan, who agree to a temporary 'hold' on $250 until the defective one arrives to DJI... but that's another topic, for a different thread.)

hello there Art,
same error here and yes, it did start with the last feb update.  came here searching for a solution, because formatting through the app did work, but a few recorded clips later, the same message came again.
also flying a first batch Mavic3cine (bought in nov), and also having disconnection issues that i havent found any solution with tech support as well.  i believe the best option is to return the aircraft.