Overview:

• Released Date: 2022.03.14
• Aircraft Firmware: v03.01.00.14
• Remote Controller Firmware: v03.01.00.10
• Pilot App Android: v3.1.1.3 (M300)
• D-RTK 2 Mobile Station for Matrice: v03.00.00.16 (D-RTK 2 Mobile Station: v02.02.0505)
• Intelligent Battery Station: v03.00.01.01
• Intelligent Fight Battery: v01.02.05.40
• Zenmuse H20 / H20T: v03.00.01.02
• Zenmuse P1: v03.00.01.04
• Zenmuse L1: v03.00.02.00
• Zenmuse Z30: v01.00.07.10
• Zenmuse XT2: v01.00.03.50
• Zenmuse XT S: v01.00.00.09
• DJI X-Port: v01.03.02.00
• DJI Skyport: v01.04.00.00
• DJI Skyport V2: v01.03.02.00
• DJI Assistant 2 (Enterprise Series): v2.1.2
• Firmware Upgrade Method:
• Aircraft / Remote Controller: DJI Assistant 2 / App
• Zenmuse H20 / H20T: microSD card / DJI Assistant 2 / App
• D-RTK 2 Mobile Station: DJI Assistant 2
• The built-in DJI Pilot app: will be updated with the Remote Controller firmware
• Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot app.)
  

What’s new？

• Updated the default period for triggering self-discharge to two days, reducing the storage time at high battery level to prolong battery life.
• Added a strategy where aircraft is prevented from flying when the battery temperature is lower than 10°C, and increased the self-heating cut-off temperature of the battery, so that the battery can work at room temperature (discharge performance is better at room temperature than low temperature), thereby improving flight safety.
• Fixed an occasional issue: where the battery could not be charged due to voltage sampling error or failure to update.
  

Notes

• Users who use Custom Network RTK must update the aircraft firmware to v01.00.02.14 or later. Otherwise, the aircraft will work abnormally.
• The aircraft cannot revert to firmware version 01.00.02.11 or earlier once the firmware is updated.
• Make sure that the aircraft, remote controller, battery, D-RTK 2 mobile station (if used), payload (if used) are updated to the latest firmware version.
• Download the latest firmware from official website to microSD card to update the ZenmuseZ30, XT S, XT2, P1 or H20 / H20T.
• It is required to use the DJI Pilot app built-in the remote controller, or download the app of V2.2.1.7 or later.
• DJI Pilot app must be updated to v.3.0.1.4 to use Offline Update.
  

When will we get a updated DJI Pilot for Android Devices (Tablets) ? It's still running on v 2.4.1.7

thank you for the info...

Why isn't this on the DJI download site and when can we get the Pilot apk file to update Tablets?

I have updated all my batteries to the new firmware and yesterday I did a recharge of all of them.  
No errors were detected during the recharge, so I am hopeful that the battery problem has been resolved.

cheers

Paul

No update to the RTK base station to allow it be a GNSS rover so I can use it for PPK applications? ... sad

Good new ! thank you.

SpeedyPhire Posted at 3-22 16:17
I have updated all my batteries to the new firmware and yesterday I did a recharge of all of them.  
No errors were detected during the recharge, so I am hopeful that the battery problem has been resolved.

After update the batteries, on my latest flight I had one battery with 5% less power than the other. Do you have encountered the same behaviour?

I fly the batteries in pair, they are bound together: they charge, fly, store together  :-)

Really a gooood news

Can I use Flighthub 2 with this version of the M300? I'm at Pilot app version V3.1.1.3
If not, how do we install Pilot 2 with M300?

Please  :-)

I finally found where to download these updates and how to install them, thanks!

Hi all! Can anyone tell me where I can find this version of firmware to download? The latest (V04.00.02.00.) succesfully f@cked up all the system, and I want to dowgrade to the march 14th edition. At least with that I could fly mapping missions...