luciens
Captain
United States
Offline
|
Nidge Posted at 3-28 00:59
The key word here is “Recommend”. And there is no supportive evidence to qualify this recommendation.
And when DJI cease production of the FPV Drone and its accessories, if they haven’t done already, will that mean you can’t fly the drone anymore if you don’t have the original props?
I'm dubious that these are going to help. I fly in manual mode nearly 100% of the time and the wobbling and bobbling in turbulence from the sloppy, loose tune is the most objectionable problem the FPV drone still has. It's fine in winds below 10mph or so, but when it gets above that (which is most of the time lol), I have to fly my Betaflight quads. They are orders of magnitude tighter even in the strongest winds and you don't get seasick like with the FPV drone in rough air.
Unfortunately, these props appear to be heavier than the stock props, which will just slow down the motor's responses rather than speed them up which is part of what's needed. They're probably just going to make the wiggling worse, rather than better. And since we'll never get access to the PIDs, we don't have a lot of options to fix this.
A better option, though, might be the Aikon prop adapters that allow fitting M5 mounting hole props, like your standard 5" Gemfans, etc., that we use on our traditional 5" quads.
https://www.getfpv.com/aikon-dji ... er-mounts-4pcs.html
But even those props aren't going to improve the rotational inertia over the stock DJI's, so I've been hesitant to spend the money. Maybe one day when I have a little extra cash to try them, I might. Some have reviewed these on Youtube, but none of them have said anything about whether any traditional prop helps with the wobbling around in flight.
Otherwise, I don't see the MA props helping the situation over the stock DJI props. The DJI props are very light weight and track impeccably, despite the kind of floppy blades. And I've never seen one mistrack yet. So it's probably already as good as you can do.
But let us know if you see any improvement. Without the PIDs we're kind of stuck with it so any improvement will be an improvement.
|
|