Hi DJI,

I use my Action2 cam on a motorcycle, powered by USB so it is ON always.
But how to control the cam ??

Bought the remote controller unit and how to attach that little controller on the bike?
Well, bought another one and modified the holder, see the picture.

Would be nice DJI to design a dedicated holder for it as an accessory...for use on bicycles, motor cycles ect.

Next step is to make this little controller waterproof   like the action2 cam.

cheers
JJB

Looks like a good use for 3d printing.

Hi, JJB*. Thank you for reaching out. I will love to take this suggestion of yours and forward it to our designated team for attention. Rest assured that we value every suggestion of our customers. Nice setup by the way. Thank you for your valued support!

DAFlys Posted at 3-28 23:35
Looks like a good use for 3d printing.

guess so, but not an easy job i think   as the holder is nicely rounded shaped.

DJI Paladin Posted at 3-29 00:25
Hi, JJB*. Thank you for reaching out. I will love to take this suggestion of yours and forward it to our designated team for attention. Rest assured that we value every suggestion of our customers. Nice setup by the way. Thank you for your valued support!

Thanks Paladin,

Garmin has a great waterproof remote controller for their camera, and easy to mount, so some work to do for your designers.

This does work, it only costs me a second controller unit, not that cheap.

cheers
JJB

The remote control fits quite loosely in the extension rod.   Any holder should be designed to make it almost impossible for the remote to fall out.

fansfe82067d Posted at 3-29 02:46
The remote control fits quite loosely in the extension rod.   Any holder should be designed to make it almost impossible for the remote to fall out.

Yes, you are right about the loose magnetic fit.

I attached a very thin 'wire'to it (see my picture)
so a) does fit better now and b) if it come loose it will still be on my bike....

cheers
JJB

Nice DIY project JJB*.  

DowntownRDB Posted at 3-29 10:53
Nice DIY project JJB*.

thanks, while driving i can easily start / stop recording. left hand always at/near the handlebar!
need some finishing, remove the thread end ect.

JJB* Posted at 3-29 23:18
thanks, while driving i can easily start / stop recording. left hand always at/near the handlebar!
need some finishing, remove the thread end ect.

Simplicity is always a plus.  

Would be nice if just the remote control was available

JodyB Posted at 3-30 08:30
Would be nice if just the remote control was available

yes, just the remote controller with a small holder to mount on a bicycle or motorcycle.
And ofcourse   make the controller waterproof!

JJB* Posted at 3-29 01:00
Thanks Paladin,

Garmin has a great waterproof remote controller for their camera, and easy to mount, so some work to do for your designers.

You are most welcome and this will be duly noted, JJB. Thank you for your continued support!  

Agree a secure accessible mount for the remote  for a motorcycle would be great and. Waterproof

Nice job bro

Any news on this product development, holder for remote control for motorcycles?

Tourmanni Posted at 2-20 09:00
Any news on this product development, holder for remote control for motorcycles?

Action4 has a remote controller wich can used on a motorcycle.
But don`t think this remote is compatible with my action2 cam.

JJB* Posted at 2-20 12:14
Action4 has a remote controller wich can used on a motorcycle.
But don`t think this remote is compatible with my action2 cam.

Good and sad news then

Actually, found one from eBay: https://www.ebay.co.uk/itm/364652257667?itmmeta=01HQ96FMPZ38YPT4PJJ9BYW5T5&hash=item54e6f7e183:g:a1QAAOSwa4dlkBFA&itmprp=enc%3AAQAIAAAA0JP3UxifT73VRbNdWrZCjA5jw0R9DB%2BctSKJLu9kYnpccWA5OMqCgo5UAh39US%2F4oz05ydtm2PbGv%2FTby2P9ujRRSr2crb4lDI3Hwf2x2O%2FsxGFYhnv1uTXCtYSruBpO7rN7VKgsoF9PyFf0MK%2Bo5NZHIUlKt2DygxkS8goI3C9Nk3YFWNgAC3PR8BPJNA04RnJVuF8r848i1gzHIBAJcul4f%2BiBHy1ib1T660JSXtxboHEZEov9geCjK%2BhGcLIarqV46THt6JlQRUj55lBhENM%3D%7Ctkp%3ABk9SR97Lvqa6Yw

Tourmanni Posted at 2-22 12:02
Actually, found one from eBay: https://www.ebay.co.uk/itm/364652257667?itmmeta=01HQ96FMPZ38YPT4PJJ9BYW5T5&hash=item54e6f7e183:g:a1QAAOSwa4dlkBFA&itmprp=enc%3AAQAIAAAA0JP3UxifT73VRbNdWrZCjA5jw0R9DB%2BctSKJLu9kYnpccWA5OMqCgo5UAh39US%2F4oz05ydtm2PbGv%2FTby2P9ujRRSr2crb4lDI3Hwf2x2O%2FsxGFYhnv1uTXCtYSruBpO7rN7VKgsoF9PyFf0MK%2Bo5NZHIUlKt2DygxkS8goI3C9Nk3YFWNgAC3PR8BPJNA04RnJVuF8r848i1gzHIBAJcul4f%2BiBHy1ib1T660JSXtxboHEZEov9geCjK%2BhGcLIarqV46THt6JlQRUj55lBhENM%3D%7Ctkp%3ABk9SR97Lvqa6Yw

There is also a version for cable ties instead of GoPro

lutzmix Posted at 2-22 21:29
There is also a version for cable ties instead of GoPro

Nice, do you have link or seller info?

Tourmanni Posted at 2-22 22:52
Nice, do you have link or seller info?

info@mibike.de

https://www.mibike.de/

send a mail  answer within one day

Handlebar holder for DJI remote control 2/4

Action 2 remote for A2/OA3/OA4  max 8x cam

Action 4 remote only OA4 max16x cam
from MiBike 3d print
well done


I can use both remotes simultan the 2er with OA3 and the 4er with the Action 4