Please select Into the mobile phone version | Continue to access the computer ver.
RC-N1 Remote Controller with Flight Simulator windiws pc
22192 18 2022-4-4
Uploading and Loding Picture ...(0/1)
o(^-^)o
G0 Fox
lvl.1
United Kingdom
Offline

Hi

New to drones, so I downloaded the DJI Flight Simulator for windiws pc about a week ago, and it works 'ok' with an old Xbox controller.
But I thought it would be better with a DJI Controller. I did look at, just buying a Controller.

But today, in a moment of madness I went out and spent £1300 on an Air 2S combo pack

the website says it comes with a RC-N1, and it says RC-N1 when I connect it to the PC with the ''DJI Assistant 2 (Consumer Drones Series)''
Assistant 2 sees it and updated it.

(but it does say RC231 on the back of it)

But it does not seem to work in the Flight Simulator

in the windows settting/ other devices/ it shows up a 'C5', and not as a controller

in windows device manager I see two usb devices under Ports (COM & LPT)
DJI USB VCOM For Debug (COM5)
DJI USB VCOM For Protocol (COM4)

I am on Windows 10
the Flight Simulator is version 1.4.0.0
the RC-N1 has firmware V04.12.0056

is it just me, or is there a problem that I am missing

any help to get it working in the Simulator would be great


Cheers




2022-4-4
Use props
DJI Stephen
DJI team
Offline

Hello there G0 Fox. I am sorry for the trouble this has caused and thank you for reaching out. It seems that the DJI RC-N1 Remote Controller is not listed on the DJI recommended Remote Controllers for the DJI Flight Simulator ( https://www.dji.com/simulator?site=brandsite&from=nav ). Kindly please use a compatible RC for you to run the DJI Flight Simulator. Kindly please refer to the image below for your reference. Thank you.

2022-4-4
Use props
G0 Fox
lvl.1
United Kingdom
Offline

Thanks for the reply. But Sorry, I am confused

Is the RC-N1 Remote Controller not the standard controllor for the Mavic Air

you know it would be a lot, and i mean a LOT easier if you posted a set of links to the 'store' pages, so I can just click and buy :|

or list the product codes of the compatible ones. or something

all I can find is https://store.dji.com/uk/product-search?q=Remote+Controllers
and I can't see any of the ones on that list

thanks for your help

ps: you can buy a cheap xbox controller for under $100 US
you'd think DJI would just make a DJI USB controller  for the Flight Simulator.


2022-4-4
Use props
G0 Fox
lvl.1
United Kingdom
Offline

Ok, just watched a dozen YouTube videos... and I might have a solution

the "DJI FPV Remote Controller 2" is not on the list, but is recognized by windows. and just comes up as a game controller
that you can use for 'just about' any game or flight sim

https://store.dji.com/uk/product/dji-fpv-remote-controller-2
at £139 I wish I'd known this before I bought the Air 2S

so unless someone has a better solution, I'll just order one

cheers

2022-4-4
Use props
G0 Fox
lvl.1
United Kingdom
Offline

Hi
Sorry still Not sorted...
went to my local FPV store and spent another £130 on a DJI FPV Remote Controller 2

downloaded the DJI Assistant 2 (DJI FPV series) and updated the firmware to v01.02.0000

Windows now sees it, but still calls it C5, and I can't calibrate it. When I move the sticks, nothing happens. Press the buttons and nothing happens

see the drivers. Are they right





any ideas on what I am doing wrong

thanks for your help
2022-4-5
Use props
G0 Fox
lvl.1
United Kingdom
Offline

Could not get it to work, so I returned the DJI FPV Remote Controller 2, and bought something else


2022-4-6
Use props
djiuser_Lx40B6v4Wjgc
lvl.1
Flight distance : 612041 ft

Philippines
Offline

G0 Fox Posted at 4-6 09:50
Could not get it to work, so I returned the DJI FPV Remote Controller 2, and bought something else

So what did worked for you?
2022-11-20
Use props
ivnn
lvl.1

Ukraine
Offline

I created a quick guide how to connect RC-N1 to simulator
https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL
2023-4-5
Use props
tuburni
New

Ukraine
Offline

ivnn Posted at 4-5 14:29
I created a quick guide how to connect RC-N1 to simulator
https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL

i have a error with with code
2023-4-17
Use props
Franck B2
lvl.1
Flight distance : 121716 ft
New Caledonia
Offline

ivnn Posted at 4-5 14:29
I created a quick guide how to connect RC-N1 to simulator
https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL

Hi,
Sorry to disturb you.
I encounter an error during launch main.py :
----------------------------------------------
Périphérique série USB (COM3)
Périphérique série USB (COM4)
Dji RC231 emulation started...
Close terminal to stop

Traceback (most recent call last):
  File "C:\Users\Bpap\Documents\Scanned Documents\Python\main.py", line 183, in <module>
    send_duml(s, 0x0a, 0x06, 0x40, 0x06, 0x24, bytearray.fromhex('01'))
NameError: name 's' is not defined. Did you mean: 'st'?
Exception in thread Thread-1 (threaded_function):
Traceback (most recent call last):
  File "C:\Users\Bpap\AppData\Local\Programs\Python\Python310\lib\threading.py", line 1016, in _bootstrap_inner
    self.run()
  File "C:\Users\Bpap\AppData\Local\Programs\Python\Python310\lib\threading.py", line 953, in run
    self._target(*self._args, **self._kwargs)
  File "C:\Users\Bpap\Documents\Scanned Documents\Python\main.py", line 168, in threaded_function
    if camera > 32000:
NameError: name 'camera' is not defined
------------------------------------------------------------
I read that another person had the same error message.
Do you have a solution to fix it ?
It is necessary to install DJI USB VCOM For Protocol port (COM/LPT/Serial) driver and where can I download it.
Thanks a lot for your help.
Franck
2023-8-1
Use props
djiuser_pStimit16zmZ
New
Peru
Offline

ivnn Posted at 4-5 14:29
I created a quick guide how to connect RC-N1 to simulator
https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL

hello, does it work for DJI RC controller too?
2023-8-6
Use props
Mateusz Ploski
New
Poland
Offline

Hi guys,
I've got an error, could you help:
C:\DJI_RC-N1_SIMULATOR_FLY_DCL-master>python main.py
Standardowy port szeregowy przez link Bluetooth (COM5)
Standardowy port szeregowy przez link Bluetooth (COM4)
Standardowy port szeregowy przez link Bluetooth (COM6)
Standardowy port szeregowy przez link Bluetooth (COM3)
Urządzenie szeregowe USB (COM7)
Urządzenie szeregowe USB (COM8)

Dji RC231 emulation started...


Close terminal to stop

Traceback (most recent call last):
  File "C:\DJI_RC-N1_SIMULATOR_FLY_DCL-master\main.py", line 183, in <module>
    send_duml(s, 0x0a, 0x06, 0x40, 0x06, 0x24, bytearray.fromhex('01'))
              ^
NameError: name 's' is not defined. Did you mean: 'st'?
Exception in thread Thread-1 (threaded_function):
Traceback (most recent call last):
  File "C:\Program Files\WindowsApps\PythonSoftwareFoundation.Python.3.11_3.11.1520.0_x64__qbz5n2kfra8p0\Lib\threading.py", line 1038, in _bootstrap_inner
    self.run()
  File "C:\Program Files\WindowsApps\PythonSoftwareFoundation.Python.3.11_3.11.1520.0_x64__qbz5n2kfra8p0\Lib\threading.py", line 975, in run
    self._target(*self._args, **self._kwargs)
  File "C:\DJI_RC-N1_SIMULATOR_FLY_DCL-master\main.py", line 168, in threaded_function
    if camera > 32000:
       ^^^^^^
NameError: name 'camera' is not defined
2023-9-3
Use props
DJI Paladin
Administrator
Flight distance : 318 ft

Offline

Mateusz Ploski Posted at 9-3 09:25
Hi guys,
I've got an error, could you help:
C:\DJI_RC-N1_SIMULATOR_FLY_DCL-master>python main.py

Hi there. Sorry for the late response. Could you please confirm if you still experiencing the said issue? Please provide us a screenshot showing the error message so we can further identify and provide you with an accurate resolution. Please keep us posted. Thank you.
2023-9-16
Use props
ivnn
lvl.1

Ukraine
Offline

https://t.me/DJI_RC_N1_SIMULATOR_FLY_DC
2023-9-25
Use props
ivnn
lvl.1

Ukraine
Offline

https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL
2023-9-25
Use props
djiuser_XkRcDUQy7dAo
lvl.1
Flight distance : 1522 ft
Canada
Offline

If you are just looking for a basic simulator to practice with, there are some drone simulators out there that work with the RC-N1 controller. I use SimuDrone, not a bunch of features but the sticks and gimbal control work great. I've been using it to practice maneuvers etc.
1-24 08:49
Use props
djiuser_Fsf8B0sWD8Qk
lvl.1
Australia
Offline

djiuser_XkRcDUQy7dAo Posted at 1-24 08:49
If you are just looking for a basic simulator to practice with, there are some drone simulators out there that work with the RC-N1 controller. I use SimuDrone, not a bunch of features but the sticks and gimbal control work great. I've been using it to practice maneuvers etc.

Seems available for phone. Was hoping for PC. Every little bit helps.
2-2 17:26
Use props
BloodshedRomanc
lvl.1

United States
Offline

ivnn Posted at 2023-9-25 03:45
https://github.com/IvanYaky/DJI_RC-N1_SIMULATOR_FLY_DCL

ok I finally got this github script installed.


install python 3.9 from python website.
add python to PATH under system settings because it does not add it automatically.

Adding the Python and Scripts directories to the PATH variable involves modifying the system environment variables. Here's a step-by-step guide on how to do this on a Windows system:

1 Find Python Installation Path:

Locate the directory where Python is installed on your system. The default path is usually C:\Users\YourUsername\AppData\Local\Programs\Python\Python3x, where YourUsername is your Windows username, and 3.x is the version number.

2 Copy Python and Scripts Paths:

Copy the path to the Python installation directory and the "Scripts" subdirectory. For example:
Python directory: C:\Users\YourUsername\AppData\Local\Programs\Python\Python3x
Scripts directory: C:\Users\YourUsername\AppData\Local\Programs\Python\Python3x\Scripts

3 Open System Properties:

Right-click on the Start button and select System.
Click on Advanced system settings on the left.

4 Open Environment Variables:

In the System Properties window, click on the Environment Variables button.

5 Edit User or System Variables:

In the Environment Variables window, you will see two sections: User variables and System variables.
If you want to modify the PATH for your user account only, edit the User variables. If you want to modify it for all users on the system, edit the System variables (you may need administrative privileges for this).
In either section, find the variable named "Path" and select it. Click on the Edit button.

6 Add Python and Scripts Paths:

In the Edit Environment Variable window, click on New.
Paste the path to the Python directory (e.g., C:\Users\YourUsername\AppData\Local\Programs\Python\Python3x) and click OK.
Click on New again, and this time paste the path to the "Scripts" directory (e.g., C:\Users\YourUsername\AppData\Local\Programs\Python\Python3x\Scripts). Click OK.

7 Apply Changes:

Click OK to close each of the open windows.

8 Restart CMD:

Close and reopen the Command Prompt to apply the changes.
You can now use the python and pip commands without specifying their full paths.
Remember to replace YourUsername with your actual Windows username and 3.x with your Python version. If you're modifying the System variables, you may need administrative privileges.



open command prompt

pip install vgamepad
pip install pyserial
(if pip is still not recognized re run the python installer, modify the install and make sure the box for "pip" is checked under Optional Features).

download/run main.py from the original github link.



After all of that, my DJI RC N1 controller is able to be seen by UNCRASHED FPV DRONE SIMULATOR.
2-4 16:19
Use props
djiuser_3HDIo3BI4JPo
New
Flight distance : 77405 ft
Serbia
Offline

BloodshedRomanc Posted at 2-4 16:19
ok I finally got this github script installed.



Thanks alot but i can’t run main.py i dont know why
3-16 12:33
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules