I had a propeller fly off yesterday while flipping it over to shut it off.

I realize that, that manouver is convenient for landing but it might be a little stressful on the propellers.
Anyway, I want to put the propeller back on. I realize the extra screws that came with my M2 have loctite on them. But I want to get some loctite so I can also reuse the screws. Which one to order?

Try Loctite 222, Small screw adhesive. It's purple in color.
Just dont use to much and bathe the prop hub with the loctite.
Loctite can eat plastics...

Flycaster Posted at 5-25 04:53
Try Loctite 222, Small screw adhesive. It's purple in color.
Just dont use to much and bathe the prop hub with the loctite.
Loctite can eat plastics...

Thanks for that! I just checked y toolbox and I have  271 and 262. I suppose I should order some 222?

Hello there inventorArtist. Good day and thank you for reaching out. I hope that our fellow DJI co pilots can give out the best recommendation and information with regard to this inquiry. Thank you and fly safe always.

inventorArtist Posted at 5-25 05:02
Thanks for that! I just checked y toolbox and I have  271 and 262. I suppose I should order some 222?

Those you have are a little "heavy" for the small screws on the prop. meant for larger size fasteners.
222 is used a small screw thread locker. Sets hard enough to not come loose, and you won't strip the screw head trying to remove them.
Just make sure you shake the bottle well before use....

Flycaster Posted at 5-26 04:26
Those you have are a little "heavy" for the small screws on the prop. meant for larger size fasteners.
222 is used a small screw thread locker. Sets hard enough to not come loose, and you won't strip the screw head trying to remove them.
Just make sure you shake the bottle well before use....

Thank you for the note!

Okay I'll order some 222 for the day I need to reuse the prop screws!

Darcy