Haven't seen the official compatibility info, would be great if someone found the link.
Also wondering if anyone tried to phisically fit the ones from Mini 2 onto Mini 3.

Don't think they will fit as the props are longer and I heard one of the YT reviewers say they were not compatible.  


UPDATE:  DJI Mini 3 Pro is compatible with DJI RC-N1 and related accessories, as  well as the DJI 18W USB Charger. Other DJI Mini 2 accessories are not  compatible with DJI Mini 3 Pro.

FAQs on DJI website for Mini 3 Pro lists what's compatible here.  

NO!!!!!!!!!!!!

Ah, the link was right there in the FAQ...
Thanks for the info!

One way to find out xD. The mini 2 propellers are much smaller, so it would be a sight to see.

The fact that the mini 3 is quiet is due to the larger propellers and lower engine revolutions, max 10.7k rpm. The Mini 2 requires about 20k rpm to fly 16 m / s. So the question is, is it possible to install the mini 3 to mini 2 propellers?

Hi there. Thank you for reaching out. The DJI Mini 2 propellers are not compatible with the DJI Mini 3 Pro aircraft. Please don't hesitate to reach us if you have other inquiries. Have a good one!

drrrrone Posted at 5-29 12:52
Ah, the link was right there in the FAQ...
Thanks for the info!

You're welcome.  

DowntownRDB Posted at 5-29 12:29
Don't think they will fit as the props are longer and I heard one of the YT reviewers say they were not compatible.  

And does the mini 3 pro props fit the mini 2?

fansdb7a79ee Posted at 6-24 13:32
And does the mini 3 pro props fit the mini 2?

Yes, it makes it go twice as fast, show us your video when you try it.

as mentioned, not compatible.

it's not ideal but these are drones not spaceships.  if i didn't pay for any of it and i didn't care, i would try all kinds of stuff.  just be careful and stay safe.

No the props are completely different

They might fit on the Mini 3 as I think they use the same screw hills but the mini 3’s props are much larger and while the mini 2’s props may work as the drone weights the same having the larger props on the mini 3 provide more thrust and use less energy and this gives you more flight time.

fansdb7a79ee Posted at 6-24 13:32
And does the mini 3 pro props fit the mini 2?

Unfortunately, they don't.

Are the motors the same?

Can you use mini 2 motor covers on the mini 3?

DJI Paladin Posted at 2022-5-29 17:31
Hi there. Thank you for reaching out. The DJI Mini 2 propellers are not compatible with the DJI Mini 3 Pro aircraft. Please don't hesitate to reach us if you have other inquiries. Have a good one!

An how is the compatibility of the Mini 3 and the Mini 3 pro props? They should be compatilbe right?

friendlyJaffa Posted at 1-29 02:53
An how is the compatibility of the Mini 3 and the Mini 3 pro props? They should be compatilbe right?

Hi there, as the standard provided screws are different, the DJI Mini 3 and Mini 3 Pro propellers are not cross-compatible.

DJI Mindy Posted at 1-29 03:04
Hi there, as the standard provided screws are different, the DJI Mini 3 and Mini 3 Pro propellers are not cross-compatible.

Thank you very much. And if I would use the old screws from the previous props?

friendlyJaffa Posted at 1-29 03:36
Thank you very much. And if I would use the old screws from the previous props?

The propellers are the same, but the provided screws are not interchangeable. If you use the old screws, they can be changeable.

DJI Mindy Posted at 1-29 19:34
The propellers are the same, but the provided screws are not interchangeable. If you use the old screws, they can be changeable.

Awesome, Thank you very much Mindy

friendlyJaffa Posted at 2-1 12:05
Awesome, Thank you very much Mindy

You're welcome. Should you have any further inquiries, please feel free to contact us.

I wonder why the screws were changed

Do you have any suggestions für super silent props for dji mini 2

Bashy Posted at 2-2 18:50
I wonder why the screws were changed

Uum I think there is a major mistake in this thread.
I believe the Mini 3 blades and the Mini 3 Pro blades are identical and that statements to the contrary are incorrect.
The screws used with the two drones ARE different, I do not know if the threads are different but the screws of the Mini 3 also act as the pivot for the blade, whereas, on the Mini 3 Pro, the blades pivot on bosses that are part of the top of the motor and the screws are simply retainers meant to prevent a blade lifting off its boss.
In fact I believe that the more recent propeller packs include BOTH types of screw.