In these two videos we talk about a problem found by Gavin HR in the band switching
We are doing a survey on many users and it seems that some models of DJI MINI 3 do not correctly switch the band in case of disturbances or even never do it and remain on the 2.4GHz frequency.
This problem could explains why some drones complain of a bad range especially in urbanized areas and others do not present any problems.

maybe its an option which frequency to see on the display so every one can see what is used

Andre vd Weide Posted at 6-20 04:07
maybe its an option which frequency to see on the display so every one can see what is used

Yes, great, could be really useful when you record the display during a fly or you simply use the drone and permit to check frequency band used.

Hello there Raf_IZ0QWM. Thank you for reaching out and for posting this video here at DJI Forum. I will forward this post to the designated DJI department for attention. Thank you.

DJI Stephen Posted at 6-20 18:53
Hello there Raf_IZ0QWM. Thank you for reaching out and for posting this video here at DJI Forum. I will forward this post to the designated DJI department for attention. Thank you.

A thousand thanks!
I appreciate that you replied to the post. Available for further clarification

I set mine manually to 2.4ghz and did a test and got no better range or connection than leaving it on auto.

DAFlys Posted at 6-20 23:29
I set mine manually to 2.4ghz and did a test and got no better range or connection than leaving it on auto.

It has zero effect on mine too.

djiuser_Fjm5pOHeyXKJ Posted at 6-20 23:32
It has zero effect on mine too.

For me the video feed was actually smoother when setting it to auto on the same route.

Andre vd Weide Posted at 6-20 04:07
maybe its an option which frequency to see on the display so every one can see what is used

Brilliant Idea.

Raf_IZ0QWM Posted at 6-20 22:05
A thousand thanks!
I appreciate that you replied to the post. Available for further clarification

Hi there Raf_IZ0QWM. You are very much welcome and thank you for the reply. Have a safe and a happy flying always. .

I hope they can find a fix.

DJI Stephen Posted at 6-22 21:46
Hi there Raf_IZ0QWM. You are very much welcome and thank you for the reply. Have a safe and a happy flying always.  .

Thank you very much. I have just seen the new update and this:

Optimized the anti-interference ability and the transmission distance of the image transmission system.

Great Stephen to you and your colleagues

Raf_IZ0QWM Posted at 6-30 10:40
Thank you very much. I have just seen the new update and this:

Optimized the anti-interference ability and the transmission distance of the image transmission system.

Apparently it did not change much though

Raf_IZ0QWM Posted at 6-30 10:40
Thank you very much. I have just seen the new update and this:

Optimized the anti-interference ability and the transmission distance of the image transmission system.

Hi there Raf_IZ0QWM. Thank  you for the reply and for sharing your positive feedback for the new DJI update. Again, thank you for your support and have a nice weekend. .