Hello guys,
So far there is no official bike mount for the DJI RC so has anyone got a recomendation on the 3rd party ones out there?
Many thanks.

The Youtuber Air Photography just did an accessory video that included one.

Anbee Bike Holder Bar Hand Mount Bicycle Holder Bracket for DJI RC Controller

Orthrok Posted at 7-25 19:29
The Youtuber Air Photography just did an accessory video that included one.

Anbee Bike Holder Bar Hand Mount Bicycle Holder Bracket for DJI RC Controller

Thanks buddy, going to take a look now.  Cheers.

That link just takes me to main menu can not see the mount.
EDIT

I found his channel and the video, funny thing is the mount he says is the one i saved on amazon.

HEX 5555 Posted at 7-26 02:55
That link just takes me to main menu can not see the mount.
EDIT

Dagnabbit, I thought it was to the Amazon page. Glad you found it.

Hello there HEX 5555. Good day and thank you  for reaching out. Since this is a 3rd party accessory to mount your DJI RC to your bike. I hope that our fellow DJI Co pilots who have purchased and uses this mount can share the best information and recommendation with regards to this matter. Thank you.

DJI Stephen Posted at 7-27 19:56
Hello there HEX 5555. Good day and thank you  for reaching out. Since this is a 3rd party accessory to mount your DJI RC to your bike. I hope that our fellow DJI Co pilots who have purchased and uses this mount can share the best information and recommendation with regards to this matter. Thank you.

Thanks, have to buy it 3rd party as looks like DJI don’t won’t to bring a mount out so leaves me no choose.

I'm still waiting for a solid handlebar mount for my Wolf GT scoot. The Anbee option is just asking for a cracked case on the RC.

Reviews are coming in for the Anbee and the screws are pulling right out of the threads and cracking the case.  BEWARE!!!

I went for this one Tineer Remote Controller Holder Bicycle Bracket Mount Compatible with DJI RC Controller Mini 3 Pro Stabilizer Bike Clamp Clip Accessories https://amzn.eu/d/4gVnOKn

Keep a close eye on it as it's the same thing as the Anbee. Just too much stress on those two little screws.

KLRSKIR Posted at 8-5 04:17
Keep a close eye on it as it's the same thing as the Anbee. Just too much stress on those two little screws.

Ok the mount has turned up and you're right, them screws are tiny! im not going to be using this.

Found this one but not to sure now to get 3rd party, come on DJI release a proper one.

https://www.amazon.co.uk/Honbobo ... ps%2C62&sr=8-13

HEX 5555 Posted at 8-11 01:43
Found this one but not to sure now to get 3rd party, come on DJI release a proper one.

https://www.amazon.co.uk/Honbobo-Mini-Pro-Bicycle-Holder/dp/B0B3RNYJPM/ref=sr_1_13?crid=3IFJILX2GKA4D&keywords=dji+mini+3+rc+mount&qid=1660210838&sprefix=dji+mini+3+rc+%2Caps%2C62&sr=8-13

That one looks a lot better! I use a GPC lanyard bracket so I'd need to remove that every time I used this. At the end of the day it still seems like a LOT of stress on only those two screws.

KLRSKIR Posted at 8-13 06:17
That one looks a lot better! I use a GPC lanyard bracket so I'd need to remove that every time I used this. At the end of the day it still seems like a LOT of stress on only those two screws.

At least them 2 screws are better than the tiny ones on the back

No doubt about that, but the plastic is so thin and too close to the glass screen for me to take a chance. If it had a cradle that supported the entire controller then I think I might bite on it.

That’s a good idea get creating it mate lol

HEX 5555 Posted at 8-11 01:43
Found this one but not to sure now to get 3rd party, come on DJI release a proper one.

https://www.amazon.co.uk/Honbobo-Mini-Pro-Bicycle-Holder/dp/B0B3RNYJPM/ref=sr_1_13?crid=3IFJILX2GKA4D&keywords=dji+mini+3+rc+mount&qid=1660210838&sprefix=dji+mini+3+rc+%2Caps%2C62&sr=8-13

Well dont buy the mount in the quoted message.
Its cheap plastic and no way would i attach that to my bike and controller!

When will someone release a fit for purpose bike mount?

That looks like perfect JUNK!

KLRSKIR Posted at 8-29 13:38
That looks like perfect JUNK!

It was and it snapped got money back from Amazon.  It was just weak 3D printed plastic

Revisiting this topic now that I have the RC and it finally works for the Air 2S. Any commercial products that reliably work without breaking?  

If not I've seen some good 3D print stuff I might try. These two 3D print items look promising...
https://www.printables.com/model ... -bikes-and-bicycles
https://www.printables.com/model ... i-3-rc-bike-adapter

KLRSKIR Posted at 8-29 13:38
That looks like perfect JUNK!

3D printed...

Also too much stress for the RC case with this design if you go offroad.

I found and ordered this one from amazon.de:  Bicycle Mount for DJI RC Controller
https://www.amazon.de/-/en/gp/product/B0B3JNNLVL

There are mostly positive reviews, including one on youtube (cannot find it now, it was in German) and the product looks promising.

Has anyone here tried it already?

RobZilla Posted at 2022-10-31 07:25
Revisiting this topic now that I have the RC and it finally works for the Air 2S. Any commercial products that reliably work without breaking?  

If not I've seen some good 3D print stuff I might try. These two 3D print items look promising...

These are the most promising mounts I've seen to date. Fully supporting the cast is most important. However, I think anything taken off-road/on a scooter will be a lot of stress on the case over time.

It's really the plastic on the RC that is the issue.