Overview:

• Release Date: 2022.10.26
• Remote Controller Firmware: v03.01.1000
• DJI Fly App: v1.7.8
  

What's New?

• Added support to the DJI Virtual Flight app.
• Fixed some minor bugs.
  

Notes:

• DJI Virtual Flight app needs to be downloaded from DJI website and installed onto DJI RC Pro. Make sure that the remaining internal storage of the remote controller is larger than 10 GB before installation. DJI Virtual Flight app download link: https://service-adhoc.dji.com/do ... 3-81e8-623bbf5f9839
• This version contains important updates. It is recommended to update the remote controller.
• If the update fails, restart DJI RC Pro, and use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to retry.
  

---

Overview:

• Release Date: 2022.08.17
• Remote Controller Firmware: v03.01.0900
• DJI Fly App: v1.6.12
  

What's New?

• Added support to use with DJI Mini 3 Pro
• Added FPV Live.
• Fixed some minor bugs.
  

Notes:

• The firmware of DJI Mini 3 Pro needs to be updated to v01.00.0300 or later.
• FPV Live is supported to use with DJI FPV Goggles V2.
• This version contains important updates. It is recommended to update the remote controller.
• If the update fails, restart DJI RC Pro, and use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to retry.
  

Thanks for this update.  

Let's update soon! Thanks

Thank you DJI

So, does this means that we can now fly the Mini 3 Pro by using the RC Pro and the Goggles V2?

Thanks DJi.  

So support for the Air 2s?

Thanks for this surprise, it's much appreciated!

I just noticed that the "Recommended Zone" acquires much quicker. Less than a minute. Inside my living room.

... this is really great news, I've been waiting for this for so long...

Mobilehomer Posted at 8-17 07:52
I just noticed that the "Recommended Zone" acquires much quicker. Less than a minute. Inside my living room.

My living room is a no fly zone, governed by the supreme domestic authorities (aka wife), overruling any other potential permit...

Hi! I made the update but I can't find the FPV Live application, how can I find it?
EDIT: Understand... FPV Live is supported to use with DJI FPV Goggles V2
I have Goggles V1 only...
The old Live FPV on Smart Controller worked very well with the v1....

FlyKapture Posted at 8-17 09:39
Hi! I made the update but I can't find the FPV Live application, how can I find it?
EDIT: Understand... FPV Live is supported to use with DJI FPV Goggles V2
I have Goggles V1 only...

I would like to make the Dji RC compatible too with the goggle V2.  i own the mini 3 pro with the rc controller and the DJI FPV combo.  They are all using O3, so should be compatible.

Mini-G Posted at 8-17 05:36
So support for the Air 2s?

It's already been supported

Amit Dunsky Posted at 8-17 09:02
My living room is a no fly zone, governed by the supreme domestic authorities (aka wife), overruling any other potential permit...

   

Mini-G Posted at 8-17 05:36
So support for the Air 2s?

The RC Pro was previously made compatible for use with the DJI Air 2S.  

Thank you for the update...

DowntownRDB Posted at 8-17 17:23
The RC Pro was previously made compatible for use with the DJI Air 2S.

My Bad! Wishful thinking of me and misreading that this was the RC Pro, not standard RC.

Hi, DJI

    I cannot find FPV Live app in Rc pro after updated.

Thank you for the massive update.  I run the original dji fpv goggles and I am hoping that I can use them with the fpv live*

areechonhotmail.com Posted at 8-17 20:51
Hi, DJI

    I cannot find FPV Live app in Rc pro after updated.

Same here, no FPV Live app to be found in the system after update

Mini-G Posted at 8-17 20:07
My Bad! Wishful thinking of me and misreading that this was the RC Pro, not standard RC.

No problem Mini.  Have a great day mate.  

When will be compatible with dji mini 2 ?

Thanks for the update Dji!

For fpv live to work --- go to the settings, display, fpv live enable.  Unfortunately they do not have support for the original DJIFPV goggles yet.  I am hoping it will come soon for everyone that has them.

mysticsquash201 Posted at 8-18 08:39
For fpv live to work --- go to the settings, display, fpv live enable.  Unfortunately they do not have support for the original DJIFPV goggles yet.  I am hoping it will come soon for everyone that has them.

I see the ability to enable FPV live in display settings, but still cannot get it to work. I’m using goggles V2. Are there more steps to get this working?

My RC Pro is stuck on v01.01.0064 and will not update.  Any help would be appreciated

Installed this update, checked all my settings in the Fly app, even recalibrated the sticks, took of with the auto launch of the Air 2S and I could not have any control with the sticks at all. There it set just hovering, thank god, in the sky. Had to restart the RC Pro, as a last attempt to regain control of the drone. That did work without the drone flying away. Never had that happen before.

areechonhotmail.com Posted at 8-17 20:51
Hi, DJI

    I cannot find FPV Live app in Rc pro after updated.

... in the "Settings" and then "Display" you will find a button with the label "FPV Live"...

fansab74bb68 Posted at 8-18 09:12
I see the ability to enable FPV live in display settings, but still cannot get it to work. I’m using goggles V2. Are there more steps to get this working?

The question is what do you expect...

You need a USB-C to USB-C cable to connect the Goggles V2 and the DJI RC Pro.
Then you have to turn on the Goggles, the FPV Drone, the FPV Controller and the DJI RC Pro and start the Fly App...
Now the camera image of the FPV drone can also be seen on the DJI RC Pro.

Will fpv live work with the dji airunit and vista as well as the dji fpv drone?   I don’t have the V2 fpv goggles, I have the original ones. I hope there will be support for them in the near future.

Amit Dunsky Posted at 8-17 03:23
So, does this means that we can now fly the Mini 3 Pro by using the RC Pro and the Goggles V2?

No. Looks like it only allows the FPV drone feed to display on the RC Pro. Totally useless feature. The only way to do this is if you have goggles with HDMI input, you can hook them up to the HDMI output on the RC Pro. Works pretty good with my older DJI goggles.

mysticsquash201 Posted at 8-18 10:52
Will fpv live work with the dji airunit and vista as well as the dji fpv drone?   I don’t have the V2 fpv goggles, I have the original ones. I hope there will be support for them in the near future.

I have only been able to get FPV Live to work using the DJI FPV drone through the DJI Fly app. Very disappointing that it doesn’t work with my aircraft with DJI Air Units.

fansab74bb68 Posted at 8-18 13:22
I have only been able to get FPV Live to work using the DJI FPV drone through the DJI Fly app. Very disappointing that it doesn’t work with my aircraft with DJI Air Units.

Yes I just had a conversation with DJI Support about it, and they said the DJI FPV Drone is all that the FPV Live can be used with. Very disappointing

djiuser_25o5zPofWwD1 Posted at 8-18 09:18
My RC Pro is stuck on v01.01.0064 and will not update.  Any help would be appreciated

me too!!! any idea how to overcome?  i tried dji assistant 2 but won't work properly with my mac os version .  reset controller, no help either.  have dji fly 1.6.12 installed.  system update says v01.01.0064 is the current one

djiuser_xNQV0gU90J3k Posted at 8-19 19:20
me too!!! any idea how to overcome?  i tried dji assistant 2 but won't work properly with my mac os version .  reset controller, no help either.  have dji fly 1.6.12 installed.  system update says v01.01.0064 is the current one

resolved.  i have the smart controller not the rc pro controller.  smart controller not compatible with mini pro 3

Fantastic

Would this remote be compatible with my mini 2 after firmware update?

Is this only for the RC or also for the RC-N1?  I am still on FW version 01.01.0300 and App version 1.6.9 with no available update.

gwadestewart Posted at 8-21 14:35
Is this only for the RC or also for the RC-N1?  I am still on FW version 01.01.0300 and App version 1.6.9 with no available update.

Its not for either one of the ones you listed.  As the title of the post indicates, it is for the "RC Pro", not the "RC" nor the "RC-N1".