Please select Into the mobile phone version | Continue to access the computer ver.
DJI Spark kept going up with no input to RC
327 2 8-27 12:44
Uploading and Loding Picture ...(0/1)
o(^-^)o
lakijs1992
lvl.2

Latvia
Offline

Today I was flying at around 400 meters going up, and the drone started going above 500m with no input to the RC. I got to about 600m even when pushing the stick down. Then I pressed the land key and stick down, and it finally went down. I was scared that I was going to lose my spark.Do you guys have an idea what could have caused this?
8-27 12:44
Use props
DJI Stephen
Super Moderator
Offline

Hello there lakijs1992. I am sorry for the trouble this has caused and thank you for reaching out. May we please know before having this issue, did your DJI Spark had any hard landing or a crash before? In addition kindly please try to calibrate your DJI Spark's remote controller for us to be able to isolate the issue. Thank you.
8-27 20:19
Use props
Wolferl
Captain
Flight distance : 23793 ft
Austria
Offline

Hi lakijs,

Just so you know: for "Open Category" drones like the Spark you are limited to a maximum of 120m in Latvia (like generally in EASA airspace). Read the rules please:
Drone Laws in Latvia

If the air was foggy/hazy it could very well be the downward sensor interpreting that haze wrongly as ground approaching, and so the drone tried to climb more.

HTH,
Wolferl
8-29 06:04
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules