Please select Into the mobile phone version | Continue to access the computer ver.
New DJI P1 Firmware Released (04/26/2023)
3725 10 2022-9-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline

Overview:
  • Release Date: 2023.04.26
  • DJI P1 Firmware: v07.00.01.10
  • Firmware Upgrade Method: DJI P1 - SD card / Update All in App   
  • Other Product Firmware and Software Required:
M300 RTK aircraft firmware: v06.01.01.00
M300 RTK remote controller firmware: v06.01.01.00
  • DJI Pilot 2 App Android: v6.1.2.3

What’s New?
  • Fixed issue where the camera cannot stop taking photos when pressing the shutter button in Timed mode after frequently switching between Timed mode and Video mode.

Notes
  • After updating to the latest firmware version, the user cannot downgrade to v04.00.02.05 or earlier.
  • Make sure that the aircraft firmware, remote controller firmware, DJI P1 firmware, and DJI Pilot app firmware are updated to the latest.







Overview:
  • Release Date: 2022.09.28
  • DJI P1 Firmware: v04.00.02.05
  • Firmware Upgrade Method: DJI P1 - SD card / Update All in App
  • Other Product Firmware and Software Required: M300 RTK aircraft firmware: v04.01.00.00
  • M300 RTK remote controller firmware: v04.01.01.01
  • DJI Pilot App Android: v4.1.1.14 (M300)


What’s New?
  • Added support time synchronization and position compensation when using with the DJI DL 24mm/50mm F2.8 LS ASPH Lens.
  • Fixed issue: HMS prompts lens infinity focus is not calibrated after Infinity Focus Calibration is performed by the user.
  • Fixed issue: the AWB difference is too large in some scenarios.


Notes
  • After updating to the latest firmware version, the user cannot downgrade to v03.00.01.04 or earlier.
  • Make sure that the aircraft firmware, remote controller firmware, DJI P1 firmware, and DJI Pilot app firmware are updated to the latest.


2022-9-27
Use props
Frontliner 2020
lvl.4
Philippines
Offline

Thanks dji...
2022-9-28
Use props
Amed
lvl.4
Flight distance : 2214019 ft
Turkey
Offline

Where will the files be downloaded from? Not on their site
2022-9-29
Use props
DJI Natalia
Administrator

Offline

Amed Posted at 9-29 02:04
Where will the files be downloaded from? Not on their site

Hi, there.
Please use this link to update to the latest version: https://www.dji.com/zenmuse-p1/downloads
Besides, if there is anything else that we can help with, please just feel free to let us know.
2022-9-29
Use props
mikes1
lvl.4
Flight distance : 1740699 ft
  • >>>
United States
Offline

Has DJI released the 24 and 50-mm lenses for the P1? I see it's part of this firmware update.
2022-10-2
Use props
Craig_Tas
lvl.4
Flight distance : 2998255 ft
Australia
Offline

Fixed issue: HMS prompts lens infinity focus is not calibrated after Infinity Focus Calibration is performed by the user.
Fixed issue: the AWB difference is too large in some scenarios.
Excellent!
2022-10-2
Use props
Arnor
lvl.4
Flight distance : 2660509 ft
Belgium
Offline

mikes1 Posted at 10-2 13:24
Has DJI released the 24 and 50-mm lenses for the P1? I see it's part of this firmware update.

Or does it mean it supports the Zenmuse X7 lenses?
2022-10-7
Use props
AtkinsDronesUK
lvl.1

United Kingdom
Offline

Is there any support for top mounting the P1 onto the M300 -  At present - it has a few glitches -
1) the image recieved to the Smart controller is upside down.
2) - if you enter the gallery to check an image, when you return to the main feed- its blank.

The second of these doesnt happen if it's on the lower gimbal connections.
Will it ever be possible to set a custom white balance?

2022-10-10
Use props
julangdamar
lvl.2
Flight distance : 511388 ft
  • >>>
Indonesia
Offline

i have update my m300 to latest firmware, and i have an issue about "continue" option in out of control action menu was missing. anybody can help me? the continue option for my work so important cause my operation area have bad signal
2022-11-1
Use props
julangdamar
lvl.2
Flight distance : 511388 ft
  • >>>
Indonesia
Offline

i have update my m300 to latest firmware, and i have an issue about "continue" option in out of control action menu was missing. anybody can help me? the continue option for my work so important cause my operation area have bad signal.
2022-11-1
Use props
Ryan H.
lvl.2
United States
Offline

Is the 16mm X7 lens supported as well? Is it necessary to update the M300 firmware for the 24mm lens to work? It seemed that some were having success before the P1 firmware update, and the 12/5/2022 update sounds like it has been a nightmare which I would like to avoid. Thank you, Ryan
2023-1-30
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules