Please select Into the mobile phone version | Continue to access the computer ver.
Phantom Vision 2 Plus
358 2 9-28 08:23
Uploading and Loding Picture ...(0/1)
o(^-^)o
goose66
lvl.1

United States
Offline

I just received back my phantom vision 2 plus drone from repair. After many years of storage, the p2vp video feed no longer worked. I did some research on the topic and learned that this was quite common. The solution was to reflash the FPV module to gain back video feed. I found a technician to perform the task. I received back my drone and now I have video feed and camera.


Questions:


If the drone goes back into storage, will this happen again?


What causes the FPV module to all of a sudden not work anymore?


Do I need to take out the p2vp drone once a month, power on and calibrate drone to prevent this from happening?



9-28 08:23
Use props
Corinne.
lvl.2
Flight distance : 6555 ft

South Africa
Offline

Any electronic product will have different problems if it is not used for a long time. If you're not going to fly a drone, just sell it. I think only the one who repaired your drone will know the cause.
9-29 00:16
Use props
goose66
lvl.1

United States
Offline

Corinne. Posted at 9-29 00:16
Any electronic product will have different problems if it is not used for a long time. If you're not going to fly a drone, just sell it. I think only the one who repaired your drone will know the cause.

Yes. I agree, electronics have different problems if not used for long time...
9-29 05:41
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules