Please select Into the mobile phone version | Continue to access the computer ver.
FCC mode only 7 channels?
359 3 10-9 00:42
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_Pdx7n4h2qG43
lvl.1
United States
Offline

Avata Pro-View purchased and based in the US but for some reason it seemed to be stuck on CE out of the box. Confirmed by going in Goggles 2 settings>Transmission>manual and 40hz is only showing 1 channel.

I then added the workaround file and got 3 ch on 40hz, however I'm only getting 7 ch on 20hz and 10hz. Should I be getting 8 ch (on 20 and 10hz) like on the DJI FPV Drone with Goggles v2?
10-9 00:42
Use props
Killerbee
lvl.3
Netherlands
Offline

I think it's different.

I got 4 channels in 40Hz mode on the FPV, and only 3 channels on the Avata.
10-9 00:49
Use props
DJI Paladin
Super Moderator
Flight distance : 318 ft

Offline

Hi there. Thank you for reaching out. The DJI Goggles 2 supports three bandwidths: 40MHz, 20MHz, and 10MHz. When the bandwidth is set to 40MHz, CH1 (one channel) is available, while there are three channels available when setting the bandwidth to 20MHz or 10MHz. In addition, the country code is mainly used to judge FCC/CE and SRRC, and we cannot judge whether it is in FCC or CE from the DJI Goggles 2 currently. Hope this helps. Thank you for your valued support.
10-9 21:41
Use props
dvv
lvl.1
United States
Offline

Same issue for me. I bought drone in US and fly in US far away from any airports or cities but drone limited to only one channel and low power. Like for CE standart
11-24 19:58
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules