Overview:

• Date: 2022.12.08
• Air Unit Firmware: v01.01.00.00
• DJI Goggles 2 Firmware: v01.03.00.00
• DJI FPV Remote Controller 2 Firmware: v02.00.04.00
• DJI Assistant 2 (Consumer Drones Series): v2.1.15
  

What's New?

• Added support to use with DJl Goggles 2. (recording from the air unit is not currently supported)
• Added support to use with DJl FPV Remote Controller 2.
• Added support to use Canvas Mode. This function is only supported when the air unit is used with DJI Goggles 2. Refer to the Canvas Mode section of the User Manual to enable OSD and set PID parameters in Canvas Mode.
  

Notice:

• After updating, the air unit will not support DJI FPV Goggles V2, DJI FPV Goggles V1 and the DJI FPV remote controller. When using DJI FPV Goggles V2, DJI FPV Goggles V1 and the DJI FPV remote controller, downgrade the air unit to v01.00.06.08.
• Restart the air unit, goggles, and remote controller once the update is complete.
• If the firmware update fails, restart the device and DJI Assistant 2 (Consumer Drones Series), and try updating again.
• Update the Air Unit (Lite) when there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.
  

---

Overview:

• Date: 2022.11.22
• Air Unit Firmware: v01.00.06.08
• Goggles V1 Firmware: v01.00.06.08
• Goggles V2 Firmware: v01.00.06.07
• Remote Controller Firmware: v01.00.06.08
• DJI Assistant 2 (Consumer Drones Series): v2.1.14
  

What's New?

• Added support to use DJI FPV Goggles V2 with DJl Avata. Tap Settings then Device and select Switch to DJI Avata.
  

Notice:

• Restart the air unit, goggles, and remote controller once the update is complete.
• If the firmware update fails, restart the device and DJI Assistant 2 (Consumer Drones Series), and try updating again.
• Goggles must be manually restarted each time after switching system.
• To switch goggles back to DJI Digital FPV System from DJI FPV or DJI Avata, tap Settings then About and select Switch to DJI Digital FPV System.
• Update the Air Unit (Lite) when there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.
  

---

Overview

• Date: 2022.10.10
• Air Unit Firmware: v01.00.06.08
• Goggles V1 Firmware: v01.00.06.08
• Goggles V2 Firmware: v01.00.06.06
• Remote Controller Firmware: v01.00.06.08
• DJI Assistant 2 (DJI FPV Series): v2.1.1
  

What’s New?

• Added support for RunCam cameras (model: Wasp).
  

Notes:

• Restart the air unit, goggles, and remote controller once the update is complete.
• If the firmware update fails, restart the device and DJI Assistant 2 (DJI FPV Series), and try updating again.
• Goggles must be manually restarted each time after switching between DJI FPV and DJI Digital FPV System.
• To switch goggles back to DJI Digital FPV System from DJI FPV, tap Settings then About and select Switch to DJI Digital FPV System.
• Update the Air Unit (Lite) when there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.
  

Thanks for the info!

thanks for the update dji...

Why I can't  update the kit? I connect dron or google v2 and see that I have the current firmware v01.03.0000

Thanks for the info.

After loosing my Avata in the El Paso mountains all I have left are these Goggles 2. Will the ever work with my other FPV drone.

Thanks for the info.

Hello djiuser_W5TfettSSeNq, have a look to this video

If the goggles 2 now support the old air units, when will they finally support the FPV drone

Will there be mode 4 available for the FPV drone? Really would like to control the drone the way i played with battlefield games for hundreds of hours. Thanks

What about the FCC hacks? Will those still work with this update? 25mW is unusable

djiuser_W5TfettSSeNq Posted at 11-2 20:09
After loosing my Avata in the El Paso mountains all I have left are these Goggles 2. Will the ever work with my other FPV drone.

... no DJI Care Refresh...?   

Can I request beta firmware to use a fpv live feed with the O3 air unit, goggles 2 and the RCPro (or any other compatible devices) ?

Hi, Need downgrade, my goggles v2 don’t work with thé last 3 versions

sad that my  "old" goggles v1 and controller can't be used as backup system for my other FPV drones with AIR UNIT
plase, DJI, will it be fixed in new updates?

I didn't see the DJI Assistant 2 (Consumer Drones Series): v2.1.15 download site!

Remote ID error after the Goggles 2 v01.03 update.  After the goggles 2 and Avata connect you get a remote id error. It only goes away if you connect the goggles to your phone with a cable and DJI Fly running. If you disconnect the cable the remote id error comes back and will not allow you to fly.  Hundreds of people on YouTube have confirmed this is happening to them as well.  Rolling  back gets rid of the error but then the drone does not let you start the propellers to take off.

where to download the new assistant 2 ?? DJI Assistant 2 (Consumer Drones Series): v2.1.15 . i  see still 2.1.14

Nelsonlee Posted at 12-8 17:24
I didn't see the DJI Assistant 2 (Consumer Drones Series): v2.1.15 download site!

me too ! didnt see this update

The ridiculous messy Firmware's....

SO, WHY ONE WOULD UPGRADE....TO NEED DOWNGRADE AFTER? don't just send an upgrade without giving options, not everyone reads the fine prints

After updating, the air unit will not support DJI FPV Goggles V2, DJI FPV Goggles V1 and the DJI FPV remote controller. When using DJI FPV Goggles V2, DJI FPV Goggles V1 and the DJI FPV remote controller, downgrade the air unit to v01.00.06.08.

dizzyfpv Posted at 12-9 01:24
me too ! didnt see this update

same here. Where's the download link? my caddx vista keeps saying it failed to load firmware list (4-10). I'm hoping the latest version will resolve this?

I like everyting about the new firmware update except for RID thing that requires you to connect your phone before you can fly.  That really sucks big time!  

We need an update on old Air Unit/Vista to support remote controller 2 & goggles v2. I know it is possible because they have the same transmission technology. Hope DJI give the update soon. Thanks

Sweet, glad to see the V2 Goggles being supported! I'll definitely have to pick up a set, now.

Is the goggle v2 still needed to rebind to the air unit after binding with O3 air unit?

So now there is not way to use Googles V2 together with small FPV controller V2 with caddx vista?
When are there plans to add support for Googles V2 and also FPV Controller V2

please support canvas for googles v2. thank you

amoruz Posted at 12-21 13:01
So now there is not way to use Googles V2 together with small FPV controller V2 with caddx vista?
When are there plans to add support for Googles V2 and also FPV Controller V2

That would be important. My controller V1 is defective and no longer available. That's why it would be important for me if I could use the controller 2. I can't use my copter at the moment. I hope for an update soon.

andretimokhin@gmail.com Posted at 2022-12-9 12:41
same here. Where's the download link? my caddx vista keeps saying it failed to load firmware list (4-10). I'm hoping the latest version will resolve this?

Download link is here.

Hi guys.
If I upgrade my Goggles V2 to the v01.00.06.07 version will it still work with caddx vista? Does  v01.00.06.07 compatible with caddx vista?
Thanks

Does this mean the DJI FPV Remote Controller 2 with the DJI FPV Goggles V2 won't work? If yes, is there another way to make it work? I don't want to buy a new controller.