DJI Gamora
Administrator
Offline
|
MacGyver007 Posted at 11-4 08:17
Well, I updated the firmware and it made no difference at all, if anything, it buzzes more during the startup, now it is 2 tones of vibration lasting around 5 seconds.
I knew a firmware update would not stop motor buzzing but DJI loves to give useless information and try to evade issues.
There are plenty of other users with this same DEFECT.
Hi, MacGyver007. Thank you for the response. We apologize for the confusion, we don't mean to feel you that way, we just need to put every small and big detail to help with the customer's concerns. Moving on, please send us a video with following the methods below for further assessment:
1. In a quiet environment, place the aircraft on a horizontal platform. Remove the propellers and power on the aircraft. Push the remote controller sticks to start up the motors.
2. After the motors rotate without a load, listen carefully to determine whether each motor has a metal friction sound. If there is the sound of any friction or foreign matter, proceed to Step 3.
3. At a place 50 cm above the aircraft, shoot a video more than 20 seconds long without blocking the recording device’s microphone.
Please upload the video/s to Dropbox or Google Drive and provide us the shareable link via PM. We will wait for your update. Thank you for your cooperation. |
|