Just updated today my DJI RC, No problems to report.

Drone doesn't lock onto anything after update. Also restricted my height to 164 ft and I am not able to view 360º panos in the 360 viewer.

Does this enable cruise control on the mini 3?

PixelPro Posted at 2-17 09:21
Does this enable cruise control on the mini 3?

Sadly not PP.

Pompy14 Posted at 2-12 22:42
Drone doesn't lock onto anything after update. Also restricted my height to 164 ft and I am not able to view 360º panos in the 360 viewer.

If your height has been restricted then the fly safe may have updated the fly zones since its last update, just a guess mind but its certainly plausible

Hi, I would like to know if there is a controller like the dji rc or the old smart controller that allows you to configure its dials to invert them and make the gimball tilt to be managed from the right dial. It would be very useful for me because I have a mobility problem in my left hand currently I can't operate the gimball properly and if it could be operated with the right hand it would be perfect! Thank you.

Will the mavic air 2 ever be compatible with this controller?

Berhatz Posted at 2022-11-3 11:13
After this update my RC died (((( It doesn't turn on at all!!!

I had this problem awhile back. Make sure your firmware on your controller is up to date.

Are there plans to add the Mavic Air 2 to the compatible equipment and if so when? I see the Mavic Air 2S was added recently I would love to be able to control my Air 2 with it also.

djiuser_CD9mvnIlOO6a Posted at 3-21 10:05
Are there plans to add the Mavic Air 2 to the compatible equipment and if so when? I see the Mavic Air 2S was added recently I would love to be able to control my Air 2 with it also.

Hi, there. We are sorry that we did not receive any related information for the time being, however, we will forward your feedback to the relevant team.
Thanks again for your reply and support.
If there is anything else that we can help with, please feel free to let us know.

change log doesn't updated? so no update on rc?

The Mini3 update log indicated the RC firmware of v01.02.0500, and the aircraft firmware updated to 01.00.0200, but the RC firmware seems left behind on 01.02.0400.  Sad times, as I was looking forward to testing the new 48MP mode.

Caladain Posted at 3-29 11:17
The Mini3 update log indicated the RC firmware of v01.02.0500, and the aircraft firmware updated to 01.00.0200, but the RC firmware seems left behind on 01.02.0400.  Sad times, as I was looking forward to testing the new 48MP mode.

RC firmware is v01.02.0600

Fixed some minor bugs.  Sure would be nice to know which bugs were fixed.  Update seems to be just to add the Mavic 3 Pro from my perspective.

DowntownRDB Posted at 4-25 12:22
Fixed some minor bugs.  Sure would know which bugs were fixed.  Update seems to be just to add the Mavic 3 Pro from my perspective.

From my perspective, I would say you are 100% correct...

Burt37 Posted at 4-26 02:02
From my perspective, I would say you are 100% correct...

  I guess the servers were too busy as I was not able to update the FW last night.  Going to try again in a bit.  I'm not in a hurry as I don't think anything great was changed for the drones I currently have.  

DowntownRDB Posted at 4-26 03:31
I guess the servers were too busy as I was not able to update the FW last night.  Going to try again in a bit.  I'm not in a hurry as I don't think anything great was changed for the drones I currently have.

Yes... It is like pension day at the Post Office...

The only update I'm not sure of what it has changed, is the one for the Mini 3 Pro. I will have to read the changelog again...

Burt37 Posted at 4-26 12:06
Yes... It is like pension day at the Post Office...

The only update I'm not sure of what it has changed, is the one for the Mini 3 Pro. I will have to read the changelog again...

  That's a great saying and I'd never heard it or read it.  Thanks for sharing.  Made my day.  

If any is using Drone Hacks on this RC Pro, seems that it blocks it or has for me. No more FCC for me until DH figures this out or I may try rolling back. Has anyone had the same issue?

Thanks for sharing

I'm having trouble updating the mavic 3 classic, and the RC... the download fails at 47% for the drone updae, and on the rc says problems connecting to server when checking for updates. Anyone having the same problem?

Thanks for the update.

Please bring custom file names!
Why is this “locked” to the Air 3

ivocorreia Posted at 5-5 06:54
I'm having trouble updating the mavic 3 classic, and the RC... the download fails at 47% for the drone updae, and on the rc says problems connecting to server when checking for updates. Anyone having the same problem?

Hi, ivocorreia. Thank you for reaching out and we're sorry for the inconvenience. Are you getting error codes? If yes, please provide it to us for further checking. Thank you.

Drey. I Posted at 5-18 15:20
Thanks for the update.

You're most welcome, Drey. I. Should you need any assistance, please let us know. Thank you.

Mini-G Posted at 9-5 06:31
Please bring custom file names!
Why is this “locked” to the Air 3

Hi, Mini-G. We'll forward this feedback to our relevant team. After the evaluation, significant suggestions or requests will be implemented via the firmware update, app update, etc. For any updates, please stay tuned to the latest news on our DJI official website at www.dji.com. Thank you for your valued support.

DJI Gamora Posted at 9-6 07:56
Hi, Mini-G. We'll forward this feedback to our relevant team. After the evaluation, significant suggestions or requests will be implemented via the firmware update, app update, etc. For any updates, please stay tuned to the latest news on our DJI official website at www.dji.com. Thank you for your valued support.

A lot of people want this!

djiuser_g1f2vtSzil0V Posted at 3-1 09:52
Hi, I would like to know if there is a controller like the dji rc or the old smart controller that allows you to configure its dials to invert them and make the gimball tilt to be managed from the right dial. It would be very useful for me because I have a mobility problem in my left hand currently I can't operate the gimball properly and if it could be operated with the right hand it would be perfect! Thank you.

At the same time, could we please have an option to assign the manual focus control slider to the right (zoom) wheel? Thank you very much.

Mini-G Posted at 9-7 07:33
A lot of people want this!

Hi, Mini-G. Rest assured that this has been forwarded. Thank you for your continued support.

Is the display of the home point, the shadow of the drone when landing, etc., independent of the drone? Why doesn't this work for Mini 3 Pro?

When will the Polish language finally be added? It's no longer funny.

djiuser_mq15iKi91S2U Posted at 9-25 04:31
When will the Polish language finally be added? It's no longer funny.

How long can you wait for the Polish language ???

Bonjour,
Ma télécommande a planté lors de la mise à jour. Elle fonctionnait très bien avant et elle s’est figée lors du chargement. La mise à jour est un échec à chaque tentative. Et depuis la mise à jour je n’est plus les voyant de charge sur ma télécommande et même en chargeant la télécommande.
Avez vous une solution ?

Bonjour,
Ma télécommande a planté lors de la mise à jour. Elle fonctionnait très bien avant et elle s’est figée lors du chargement. La mise à jour est un échec à chaque tentative. Et depuis la mise à jour je n’est plus les voyant de charge sur ma télécommande et même en chargeant la télécommande.
Avez vous une solution ?

djiuser_TmzpPV8iW9rv Posted at 10-6 20:44
Bonjour,
Ma télécommande a planté lors de la mise à jour. Elle fonctionnait très bien avant et elle s’est figée lors du chargement. La mise à jour est un échec à chaque tentative. Et depuis la mise à jour je n’est plus les voyant de charge sur ma télécommande et même en chargeant la télécommande.
Avez vous une solution ?

Hello there. Sorry about the inconvenience. May I know what's your remote and are you still able to turn it on? If so, please try updating it using the DJI Assistant 2. Please keep us posted. Have a nice day.

I got the .600 firmware today, did anyone else?  I dont see any announcement about it...

New Firmware?

DJI Tony Posted at 10-17 04:05
Hello there. Sorry about the inconvenience. May I know what's your remote and are you still able to turn it on? If so, please try updating it using the DJI Assistant 2. Please keep us posted. Have a nice day.

Hi Tony,

As I have asked many times before, when you do an update to the FW on the first post can you delete the trail of comments that follow?

There is no way to know what version of the FW the comments relate to........

So rather than just doing an edit on the first post, can you copy the first posts history and start a new thread?

The we will have the FW history in the first post and then know that the comments relate to the FW version at the top of the post.

Please.........

bjr981s Posted at 11-14 05:39
Hi Tony,

As I have asked many times before, when you do an update to the FW on the first post can you delete the trail of comments that follow?

Just like we have asked for release notes to be professional and actually state what was fixed or changed.  

Just nothing?