****BEWARE**** Once you update your drone to 0900, you cannot downgrade your firmware, even if you try to use the Drone Hacks app. Dji has changed the anti rollback value now to 2. First FW values was set to 0, then to 1 and now its 2, so no other FW will be compatible agter updating.




So my findings from flying 2 batteries so far, not fully charged was great. I just enjoy the cruise mode, its super. I can set my speed and just control the drone towards the place I want to go. The brake force adjustment feature is so amazing as well, the drone does not give any jerkiness when stopping if you set it to a lower value but goes further before it stops fully so beware of that. Cannot test night mode as it is still bright out here but the M3 had a good camera for night shooting either way. Airsense for me does not fully work still but I did get 1 quick 2 second warning when the manned helicopter was only directly above my drone - this needs a lot of work from Dji. Other than this I personally feel that the signal penetration is much stronger. I sat in my lounge with the drone 2km away and closed the glass sliding door and only had 1 signal bar drop. Flew 4km away and no signal drop but I am on the DH FCC hack as well but never had this good signal before even with the hack. When updating the RC Pro, if you have the drone hacks hack for FCC, it still works.

Thanks for the info Suren, ARB#2 makes it a definite no go for me; those gimmick features can't lure me into RID

Thanks for the info!

I think they are blocking the rollback because of the EU C1 classification that they are allowing retrospectively for drones that are updated.

Thanks for the info!

Thanks for this info Suren.  

Great info to know.  Thanks for sharing Suren.

Good report Suren!  Thank you for breaking it down.  Sounds like no new bugs introduced so far. :  )

Monkey007 Posted at 11-2 21:20
Thanks for the info Suren, ARB#2 makes it a definite no go for me; those gimmick features can't lure me into RID

You welcome mate. I don't think we will see RID hitting us for a few years, well here there is no talk about it

ro_walker Posted at 11-2 23:19
Thanks for the info!

You are welcome

DAFlys Posted at 11-3 00:47
I think they are blocking the rollback because of the EU C1 classification that they are allowing retrospectively for drones that are updated.

Tha could be it but normally when Dji removes previous versions from Assistant 2, they dont change the anti rollback value.

Montfrooij Posted at 11-3 02:01
Thanks for the info!

You are welcome Monty

Grimtheviking Posted at 11-3 03:17
Thanks for this info Suren.

You're welcome, mate

DowntownRDB Posted at 11-3 04:06
Great info to know.  Thanks for sharing Suren.

You're welcome

TonyPHX Posted at 11-3 05:40
Good report Suren!  Thank you for breaking it down.  Sounds like no new bugs introduced so far. :  )

Thanks Tony, well maybe just a bug in the app for the Aux light function that disappeared.

Suren Posted at 11-3 11:59
You are welcome Monty

Good day, Suren. I have gotten accustomed to the "new" Airsense and grown to like it. If you open the map, it shows craft several miles away. Sometimes over twenty miles away. It only warns if a collision can be imminent. I generally get one or two warnings a night. I fly quite often getting sunset Hyperlapses.

Mobilehomer Posted at 11-3 12:32
Good day, Suren. I have gotten accustomed to the "new" Airsense and grown to like it. If you open the map, it shows craft several miles away. Sometimes over twenty miles away. It only warns if a collision can be imminent. I generally get one or two warnings a night. I fly quite often getting sunset Hyperlapses.

Mine also shows aircrafts very far away but the warnings are so quick on the screen like 2 seconds for me. I found with this new FW that signal penetration is so good that you don't need to fly very high now to get distances and i flew 4 batteries at 40 meters and went out almost 6km away with just 1 bar signal drop

Suren Posted at 11-3 12:00
Thanks Tony, well maybe just a bug in the app for the Aux light function that disappeared.

Yep, just started reading about that one.  : )

I get to miss the initial fun while my M3C is "serviced".

Suren Posted at 11-3 11:58
Tha could be it but normally when Dji removes previous versions from Assistant 2, they dont change the anti rollback value.

I suspect they want to be seen to be doing something for the EU regulators.    EASA was really against retrospective classification previously so they pulled off a miracle almost.  

Suren Posted at 11-3 11:59
You're welcome

Have a great day Suren.    

thanks.. i would like to set my m3 to fcc here in Norway.. bu i don´t have an android...

Ulven Posted at 11-4 04:05
thanks.. i would like to set my m3 to fcc here in Norway.. bu i don´t have an android...

See your PM's

TonyPHX Posted at 11-3 20:12
Yep, just started reading about that one.  : )

I get to miss the initial fun while my M3C is "serviced".

Mine ended up fixing itself after I reinstalled the firmware. I had my vpn on so not sure if that affected it but it works for me now.

Suren Posted at 11-3 11:58
You are welcome

My pleasure!