LV_Forestry Posted at 11-6 02:58
Maybe you should start by downloading the latest firmware:
https://terra-1-g.djicdn.com/851d20f7b9f64838a34cd02351370894/zenmuse%E5%9B%BA%E4%BB%B6/Z30_FW_V01.00.07.10.bin
Then perform the installation as described in the manual:
Already done :
[ 5.275745] <<<==== INTO SD CARD UPDATE CHECK MODE upgrade ====>>>
[ 5.283451] Firmware packet number on sd card:1.
[ 5.287781] Packet: [/mnt/usb/Z30_FW_V01.00.07.10.bin];
[ 5.295261] New Firmware, version:1.0.2.198.
[ 5.301969] Update mode: Normal
[ 5.337576] [0x4 0x1]V1.6.17.17 -> V1.6.17.17 not need upgrade
[ 5.357665] [0x4 0]V1.1.3.9 -> V1.1.3.9 not need upgrade
[ 5.363005] [0x1 0]V1.0.74 -> V1.0.74 not need upgrade
[ 5.367016] Check Firmware Done.
[ 5.371446] Check Result: Aborted.
[ 5.375587] The firmware on the SD card is identical to or older than the current firmware on the remote controller.
Christian Guyot Posted at 11-6 14:21
I tried to connect to payload 2 and it worked! payload 1 seems clean but I wonder how to check it, if I need to send it to support
Sometimes its not visible. I clean it with dry compressed air. I recommand to not put oil on the metal part as it is recommanded by DJI in the maintenance part. If you do so, it become a real trap for all dust coming there. Better use dry air !
Hi, there.
May we know if your problem is resolved now?
If there is anything that we can help with, please feel free to let us know.
Thank you for your support.
For the moment I don't see the notification error on payload 2. Can you check with your engineers if the connection of the Zenmuse Z30 is possible on payload 1? At the same time I will follow the advice of LV-Forestry to clean and test the payload1