Please select Into the mobile phone version | Continue to access the computer ver.
New Matrice 30 Series Firmware Released (02/22/2023)
8203 16 2022-11-9
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
Administrator
Flight distance : 2408 ft
Hong Kong
Offline

Overview:
  • Date: 2024.02.22
  • Aircraft Firmware: v09.01.00.06
  • Remote Controller Firmware: v03.02.09.07
  • DJI Pilot 2 App: v9.1.0.21
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v07.00.01.29*
  • Intelligent Flight Battery: v02.00.20.58
  • DJI Assistant 2 (Enterprise Series): v2.1.12
  • Firmware Upgrade Method:
  • Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
* The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.

What’s new

  • Added support to set flight altitude in Linear Flight tasks.
  • Added support to set panorama when taking photos in Waypoint Route.
  • Added support to take orbit shots in POI tasks.
  • Added support to display AR RTH flight route during RTH in DJI Pilot 2.
  • Added support to display AR Landing Point during landing in DJI Pilot 2.

Notes:
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.

To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:




Overview:
  • Date: 2023.12.28
  • Aircraft Firmware: v09.00.05.03
  • Remote Controller Firmware: v02.02.08.03
  • DJI Pilot 2 App: v9.0.5.39
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v07.00.01.29*
  • Intelligent Flight Battery: v2.1.12
  • DJI Assistant 2 (Enterprise Series): v2.1.11
  • Firmware Upgrade Method:   
  • Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
* The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.

What’s new
  • Fixed some minor bugs.
  • Added some functions to meet local regulation requirements.

Notes:
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.
  • Visit https://www.dji.com/flighthub-2 for more information on DJI FlightHub 2.
  • Scan the QR code to contact DJI Support:








Overview:
  • Date: 2023.10.30
  • Aircraft Firmware: v08.00.00.03
  • Remote Controller Firmware: v02.02.05.07
  • DJI Pilot 2 App: v8.0.0.38
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v07.00.01.29*
  • Intelligent Flight Battery: v02.00.20.58
  • DJI Assistant 2 (Enterprise Series): v2.1.11
  • Firmware Upgrade Method:
Aircraft / Remote Controller: DJI Assistant 2 / App
D-RTK 2 Mobile Station: DJI Assistant 2
The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
* The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.

What’s new
  • Improved remote controller system stability.

Notes:
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.
  • Visit https://www.dji.com/flighthub-2 for more information on DJI FlightHub 2.
  • Scan the QR code to contact DJI Support:





Overview:
  • Date: 2023.10.12
  • Aircraft Firmware: v08.00.00.03
  • Remote Controller Firmware: v02.02.04.05
  • DJI Pilot 2 App: v7.1.0.32
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v07.00.01.29*
  • Intelligent Flight Battery: v02.00.20.58
  • DJI Assistant 2 (Enterprise Series): v2.1.11
  • Firmware Upgrade Method:        Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
  • * The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.

What’s new
  • Improved aircraft flight stability.

Notes
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.
  • Visit https://www.dji.com/flighthub-2 for more information on DJI FlightHub 2.










Overview:
  • Date: 2023.09.18
  • Aircraft Firmware: v07.01.00.26
  • Remote Controller Firmware: v02.02.04.05
  • DJI Pilot 2 App: v7.1.0.32
  • D-RTK 2 Mobile Station:  v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v07.00.01.29*
  • Intelligent Flight Battery: v02.00.20.58
  • DJI Assistant 2 (Enterprise Series): v2.1.10

Firmware Upgrade Method:
  • Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
  • * The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.


What’s new
  • Updated the RTH to Advanced RTH. The aircraft can automatically plan the flight path to avoid obstacles and fly to the Home Point during the return-to-home process.
  • Added support to improve the safety of RTH and the safe Resume Task from Breakpoint. Users can view the guide in the Mission Editing View of the Waypoint Route in the app.
  • Ortho Collection supports the customization of the gimbal angle.
  • Added the function of Custom Flight Area. Users can plan custom flight areas on DJI FlightHub 2 and deliver them to the aircraft.
  • Added the function of Find My Drone in Flight Controller Settings. In scenarios such as aircraft emergency landing or flyaway, information such as position display and coordinate sharing help users to find the aircraft.
  • Added ability to view the downloaded photos and videos in Album when the aircraft is disconnected.
  • Added support to save multiple sets of configurations for custom network RTK.
  • Added support to search location by texts, GEO zone alerts, and scan code to obtain target point locations in Map for DJI Pilot 2.
  • Added DJI Care Flyaway Coverage for DJI Care Enterprise. Users can report flyaway aircraft in Device Management.
  • Added ability to import unlocking licenses offline.
  • Optimized UI for Flight Route Library.
  • Ortho Collection supports selecting start point for flight routes.
  • Added ability to adjust the stick EXP for remote controller.
  • Added support for EU C2 certification.


Notes:
  • The firmware cannot be downgraded to v07.00.01.46 or lower after updating to this version.
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.
  • Visit https://www.dji.com/flighthub-2 for more information on DJI FlightHub 2.








Overview:

  • Date: 2023. 05.18
  • Aircraft Firmware: v06.02.08.03
  • Remote Controller Firmware: v01.02.04.40
  • DJI Pilot 2 App: v7.0.1.0
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v06.02.08.03*
  • Intelligent Flight Battery: v02.00.20.57
  • DJI Assistant 2 (Enterprise Series): v2.1.9
  • Firmware Upgrade Method: Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
* The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v06.01.10.02 in DJI Pilot 2.

What’s new
  • Added support to switch the aircraft model for DJI RC Plus remote controller, which can be used with various aircraft models.

Notes:
  • Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.
  • Visit https://www.dji.com/flighthub-2 for more information on DJI FlightHub 2.



Overview:
  • Date: 2023.04.25
  • Aircraft Firmware: v06.02.08.03
  • Remote Controller Firmware: v01.02.03.67
  • DJI Pilot 2 App Android: v6.1.2.2
  • D-RTK 2 Mobile Station:  v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v06.02.08.03
  • Intelligent Flight Battery: v02.00.20.57
  • DJI Assistant 2 (Enterprise Series): v2.1.8
  • Firmware Upgrade Method: Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
  • * The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v0 6 .0 1 .1 0 02 in DJI Pilot 2.

What's new
  • Optimized DJI Dock related features.
  • Optimized strategy to keep the battery warm in low-temperature environments.
  • Optimized battery maintenance strategy.

Notes:



Overview:
  • Date: 2022.12.02
  • Aircraft Firmware: v05.01.00.00
  • Remote Controller Firmware: v01.02.03.42
  • DJI Pilot 2 App Android: V5.1.1.8
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v04.03.01.47*
  • Intelligent Flight Battery: v02.00.20.41
  • DJI Assistant 2 (Enterprise Series): v2.1.6
  • Firmware Upgrade Method:
           Aircraft / Remote Controller: DJI Assistant 2 / App
           D-RTK 2 Mobile Station: DJI Assistant 2
           The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
           Intelligent  Battery Station: App (Connect the Battery Station to the remote  controller and update it on the HMS page in the DJI Pilot 2 app.)
*  The Intelligent Battery Station firmware update includes the battery  update. After being updated, the battery station version will be shown  as v05.02.12.31 in DJI Pilot 2.

What’s new?
  • Fixed issue where importing KMZ file fails.

*  Due to the characteristics of the infrared sensor, it is possible that  the sensor will burn before burn protection is triggered. To avoid the  sensor from burning, DO NOT operate the camera in direct sunlight. For  minor burns, let the aircraft sit or manually perform FFC to try and  restore the sensor.

Notes:







Overview:
  • Date: 2022.11.10
  • Aircraft Firmware: v04.03.00.00
  • Remote Controller Firmware: v01.02.02.50
  • DJI Pilot 2 App Android: v4.2.1.0
  • D-RTK 2 Mobile Station: v03.01.0000 (incl. Matrice version)
  • Intelligent Battery Station: v04.02.01.03*
  • Intelligent Flight Battery: v02.00.20.37
  • DJI Assistant 2 (Enterprise Series): v2.1.3
  • Firmware Upgrade Method:        Aircraft / Remote Controller: DJI Assistant 2 / App
  • D-RTK 2 Mobile Station: DJI Assistant 2
  • The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
  • Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
*The Intelligent Battery Station firmware update includes the battery update. After being updated, the battery station version will be shown as v05.02.12.31 in DJI Pilot 2.

What’s new?
  • Added support for DJI Pilot 2 to download online geoid files.
  • Added support for importing and exporting MapTiler offline maps.
  • Added support for DJI Pilot 2 message notifications.
  • Added support for AI Spot to use metering.
  • Optimized estimated battery power level.
  • Optimized estimated Waypoint task operation time.
  • Optimized effectiveness of sun burn protection for the infrared camera sensor.

*Due to the characteristics of the infrared sensor, it is possible that the sensor will burn before burn protection is triggered. To avoid the sensor from burning, DO NOT operate the camera in direct sunlight. For minor burns, let the aircraft sit or manually perform FFC to try and restore the sensor.

Notes:
  • To ensure safe use and efficient operation of the new product, it is recommended to visit the links below for a comprehensive understanding of Matrice 30 series safety and product information:
  • Visit https://www.dji.com/matrice-30/downloads to download manuals such as the Quick Start Guide, Safety Guidelines and User Manual.
  • Visit https://www.dji.com/matrice-30/video to watch the tutorial videos.

1.png




2022-11-9
Use props
Montfrooij
Captain
Flight distance : 2560453 ft
  • >>>
Netherlands
Offline

Thanks for the info!
2022-11-10
Use props
nick27381
lvl.1

Pakistan
Offline

hey good one
2022-11-27
Use props
djiuser_f3dhOGJv6YcL
New

United States
Offline

Good to see.
2022-12-12
Use props
dronesgeek
lvl.2

India
Offline

Cool stuff coming
2023-5-18
Use props
fans6dbf32ea
New
Egypt
Offline

Hi
I just updated to the new firmware but I have an issue linking the remote controller to the the plane
Any problems with this new firmware? Any recommended solutions?
2023-6-1
Use props
djiuser_kGchYZnFF2er
lvl.1
Flight distance : 6184 ft

United States
Offline

Updated the firmware this morning, instantly had issue with vision system.  Have attempted recalibration a dozen times and the calibration fails every time.  Did not have an issue before the update.
2023-9-19
Use props
DJI Gamora
Administrator

Offline

djiuser_kGchYZnFF2er Posted at 9-19 13:10
Updated the firmware this morning, instantly had issue with vision system.  Have attempted recalibration a dozen times and the calibration fails every time.  Did not have an issue before the update.

Hi, djiuser_kGchYZnFF2er. Thank you for reaching out and we're sorry for the inconvenience. Can you please provide the exact error that you're getting with the vision system? We will wait for your reply. Thank you.
2023-9-20
Use props
djiuser_tM4qfVSpJqLV
lvl.1

France
Offline

Hi,
Where i canf ind the RID (operator number) ?
2023-9-20
Use props
fanse9a1f53c
lvl.2
Flight distance : 1837221 ft
Italy
Offline

salve , parlo a nome di croce rossa italiana , abbiamo avuto problemi con l ultimo aggiornamento del firmware dell m30 t non si aggiornano le safety zone rimane sempre la notifica in giallo sulla pilot 2 non si aggiorna neanche con dji assistent ,come possiamo risolvere?? grazie
2023-9-23
Use props
djiuser_ZuUi8Seum7Oo
lvl.3
Flight distance : 111138 ft
United States
Offline

DJI Gamora Posted at 9-20 02:37
Hi, djiuser_kGchYZnFF2er. Thank you for reaching out and we're sorry for the inconvenience. Can you please provide the exact error that you're getting with the vision system? We will wait for your reply. Thank you.

I updated 2 hours ago and now I have the Vision and Sensor Warnings. Also, while RTH is enabled, I press C1 (gimbal down) and it goes down but immediately returns to horizontal. We need to fix these bugs ASAP!!!
2023-9-24
Use props
djiuser_K9Qbg00Ilzs4
lvl.1

United States
Offline

Well DJI since I dropped 10 grand on a drone and don't have access to post new threads I will ask my question here.  How do I unbind previous owner from Matrice 30T if I have no idea who that person is and can't contact them directly ???
2023-9-24
Use props
KAPtureDM
lvl.2
Flight distance : 24704396 ft
  • >>>
United States
Offline

Your FORCED update happened MID-FLIGHT causing a RTH and now the vision system is inoperable, and have performed 5 successful calibrations.  ALL of which did nothing, vision system still isn't working.  I believe my "flight distance" is a sufficient response to any "Have you tried..." questions. ANYTHING??
Exact Errors from Log:
"vision system connection error"
"vision system calibration error"
"infrared connection error"
"infrared calibrations erros"

Brand new bird...someone at the factory forget to plug in a cable or is the new "Forced, not able to rollback" outrageously fishy firmware the culprit?
2023-9-24
Use props
Salvarez
lvl.1
  • >>>
Spain
Offline

When are we going to have the problem of the new update resolved by DJI support, to be able to update the dynamic database ?
Many days have passed since the problem arose.

Thanks.
2023-10-5
Use props
DJI Gamora
Administrator

Offline

djiuser_ZuUi8Seum7Oo Posted at 9-24 13:21
I updated 2 hours ago and now I have the Vision and Sensor Warnings. Also, while RTH is enabled, I press C1 (gimbal down) and it goes down but immediately returns to horizontal. We need to fix these bugs ASAP!!!

Hi, djiuser_kGchYZnFF2er. Let me forward your concern to our relevant team for further checking. We'll let you know once we receive an update. Thank you.
2023-10-5
Use props
DroneM30T
lvl.2

United States
Offline

I just updated the firmware on my Matrice M30T.  However, the mapping interface has changed and I can no longer use the custom camera to use the Zoom Camera for mapping.  How can I revert back to the previous firmware and why did DJI remove the custom camera feature for the M30T.  It's bad enough that I just purchased the drone around 6 months ago before a huge price drop.  The M30T should be adding new functions not removing them.  

Thanks,
2023-10-22
Use props
DJI_TT
lvl.2

Canada
Offline

Hi, after the update we cannot have mobile internet on the DJI RC Plus. Prefere network and APN option is not there anymore in mobile network setting. Did the update on two controler and now on both of them my 4g usb modem is not working.
Try to reset network setting, did a full reset and update it again, still nothing
2023-11-22
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules