Hello guys whats the difference between RockSteady+ and normal RockSteady?

additional UMPH probably a lil stronger  EIS if asked.  if DJI  could tell us that be appreciated then all of us guessing

Hi there. Thanks for your inquiry. RockSteady is an electronic image stabilization (EIS) technology specially designed for the Osmo Action (1, 2, and 3). This technology is achieved by increasing photosensitivity parameters and shutter speed, analyzing the images captured by the sensor, and compensating images through edge imaging. It detects the vibrations of the camera in each direction through a software algorithm and effectively eliminates vibrations by cropping images, ensuring overall clearness.
RockSteady+ indicates super stabilization that is newly added for better stabilization, providing stable and balanced footage. Hope this helps! Should you have further concerns, please reach back here at DJI Forum. Thank you, and keep safe.

DJI Tony Posted at 12-5 22:08
Hi there. Thanks for your inquiry. RockSteady is an electronic image stabilization (EIS) technology specially designed for the Osmo Action (1, 2, and 3). This technology is achieved by increasing photosensitivity parameters and shutter speed, analyzing the images captured by the sensor, and compensating images through edge imaging. It detects the vibrations of the camera in each direction through a software algorithm and effectively eliminates vibrations by cropping images, ensuring overall clearness.
RockSteady+ indicates super stabilization that is newly added for better stabilization, providing stable and balanced footage. Hope this helps! Should you have further concerns, please reach back here at DJI Forum. Thank you, and keep safe.

Thanks for your reply ,
But if + is better what is the purpose of keeping normal Rocksteady also ?

nikolaospaschalisgmail.com Posted at 12-5 22:37
Thanks for your reply ,
But if + is better what is the purpose of keeping normal Rocksteady also ?

Thanks for your response. Please note that for different resolutions and frame rates, only certain EIS modes can be selected. Keeping RockSteady provides more options for users. To ensure that the limited computing power can be used for image decoding, the DJI Osmo Action series devices will limit the EIS function (i.e which cannot be enabled or only RockSteady can be enabled).
Apart from the above reasons, the inability to enable the EIS function in non-video mode is also attributed to the following factors:
1. In Slow Motion mode, a video is recorded with a high frame rate but displayed with a low frame rate. As such, when the final video is played, slow playing will enrich the details and smoothen the connection of each frame. The video shaking due to handheld inability will become less significant. As such, no additional electronic stabilization is required.
2. In Timelapse mode, the device is placed in a static status and does not involve motion video. As such, no additional electronic stabilization is required.
3. In Hyperlapse mode, the EIS function is enabled by default, and the EIS function setting is not required.
We appreciate your understanding and support. Have a nice day.

Can you explain how Rocksteady + is not available and noted it is  on the Osmo Action.

can we have a better understanding exactly where it works;  are you saying on slow motion we have RS+