Please add andi@goarf.de to the beta list. Thanks

AlbertoMancini Posted at 2-3 09:47
Hi Dear, i'm using the Action 2 on the top of the GEPRC cinelog25 with caddx vista. If you want i can send you CLI of my betaflight (ESC of 35A)

I have the Snapshot 2.5 and I am still waiting for my request to join the beta to be granted. I am so excited to test this out with my cinewhoop. Looks like the result is great on your output.

DJI, please add me to the beta group too. Can you please use my email associated to my account?

Is there a glitch in the orientation of the video or I wasn't able to use gyroscope properly ?

The new firmware works great. Gyroflow together with Action2 is a great duo. Here the result of the cooperation: https://youtu.be/y02rVumT9Ek
Thanks DJI.

The new firmware works great. Gyroflow together with Action2 is a great duo. Here the result of the cooperation: https://youtu.be/y02rVumT9Ek
Thanks DJI.

Hi! I'd like to join beta program, please add me too! alexandrovweb@gmail.com

Please add me to beta:

arveb@outlook.com

Hello,
Can you please add the dji action 2 beta firmware to my mimo account? I would like to review it. Here it is.
tedy_faithboy1501@yahoo.com

Will you add 10 bit color feature on the next updates?

Hi all, firmware requests above have been taken care of, please connect the camera to DJI Mimo app and check for the update. Thank you.

DJI Susan Posted at 2-4 22:33
Hi all, firmware requests above have been taken care of, please connect the camera to DJI Mimo app and check for the update. Thank you.

Thank you.

DJI Susan Posted at 2-4 22:33
Hi all, firmware requests above have been taken care of, please connect the camera to DJI Mimo app and check for the update. Thank you.

What shall we do to receive it?

Connected to MIMO: nothing happened.

Thank you!

Hi ,i would like to test this beta firmware pls

DJI Susan Posted at 1-28 20:10
Hi there, if the DJI email account was not attached, I will forward the firmware to the forum email account. Only Action 2 users will receive this beta firmware. May I know if you would need to have the beta firmware? If so, I have forwarded the beta to your forum account, please check.

hi,

just curious.. where could this attachment be found, then?
my forum and my dji mimo app both use the same email address. i just checked but could not find any kind of message in the mimo app messages section.. nor at the email address used by the forum. i do get reply notifications etc. there, though....

Maxx2206 Posted at 2-5 15:19
hi,

just curious.. where could this attachment be found, then?

hi,

nevermind...
there was no notification, but once i managed to connect to the action2's the update prompt showed up.
the connection issues are/were really a pain lately... i really hope the beta already helps with it

lots of testing to come ;)

thank you...

Danergo Posted at 2-5 06:03
What shall we do to receive it?

Connected to MIMO: nothing happened.

Please make sure that the app has been connected to the internet and the Action 2 camera is connected, and the DJI account used in the DJI Mimo app is the same as the one you applied to receive the beta firmware. You may try to log out and sign in again. Please see if this works.

djiuser_0mAibdU7ibcF Posted at 2-5 12:45
Hi ,i would like to test this beta firmware pls

Hi there, the beta firmware has been sent to your account, please connect the DJI Mimo and DJI Action 2 and check for the update. Thank you.

Maxx2206 Posted at 2-5 15:25
hi,

nevermind...

Thank you for your update and confirmation. Hope to receive your feedback soon.

DJI Susan Posted at 2-4 22:33
Hi all, firmware requests above have been taken care of, please connect the camera to DJI Mimo app and check for the update. Thank you.

Thank You!

Gyro Dataを使用したいです。テストプログラムでも使用出来るのなら、製品を購入します。今からでも、参加可能でしょうか？bessho0102@gmail.com

DJI Susan Posted at 2-5 20:09
Please make sure that the app has been connected to the internet and the Action 2 camera is connected, and the DJI account used in the DJI Mimo app is the same as the one you applied to receive the beta firmware. You may try to log out and sign in again. Please see if this works.

i have same problem too, already follow your guide, but nothing happen...
my dji account : danangadhityo@gmail.com
thanks

Hi DJI,

Count me in, I would like to test this beta firmware.

rullybali@gmail.com

Thank you

DJI Susan Posted at 1-5 20:11
Hi all, firmware requests above have been taken care of, please connect the camera and DJI Mimo app and check for the update.

hi dji,

could you please add my account to test beta firmware,
my email: iman.unforgetable@gmail.com

Thank U

DJI Susan Posted at 2-5 20:09
Please make sure that the app has been connected to the internet and the Action 2 camera is connected, and the DJI account used in the DJI Mimo app is the same as the one you applied to receive the beta firmware. You may try to log out and sign in again. Please see if this works.

Thank you, this time it worked.

Hi all, the beta firmware has been sent to your account, please connect the DJI Mimo and DJI Action 2 and check for the update. Thank you.

Hi, i need this beta frimware please!
haqi.farkhan87@gnail.com

Folks, I always get this when I open a video:



I have recorded without stabilization, with "Wide FOV". BUT! with the camera module alone: onto the internal storage! Is it not intended to work with this version?
Video details:



My versions:

Firmware Ver: 01.04.04.20
Camera Firmware Ver: 10.00.36.17

Am I missing something?

Danergo Posted at 2-6 07:48
Folks, I always get this when I open a video:
[view_image]
[view_image]

User error, video done with 4K 16:9 25fps which doesn't store gyro.

Danergo Posted at 2-6 07:48
Folks, I always get this when I open a video:
[view_image]
[view_image]

This is posted on the first page by DJI. This should help.

How to set up the camera so that the video will include gyro data?
Resolution: 4K (4:3) 24/25/30/48/50/60; 4K (16:9) 100/120.
Stabilization: off
FOV: Wide

Timarr Posted at 2-6 09:40
This is posted on the first page by DJI. This should help.

How to set up the camera so that the video will include gyro data?

Yepp, I realized as soon as I posted here.

I tried to remove my post, but I couldn't find a way to do it - therefore I posted a new comment that it was my mistake.

Although, I tried once again, and it seems, that using the lanyard in some not-so-great-lighted environment makes impossible for Gyroflow too to correct the shaking caused by my steps.

(Expo was on "auto" setting)

Anyone has solution for this (other than using a gimbal - which would be heave for the lanyard ) ?

When recording 4k 4:3 there is no gyroscope data in every fps. No gyroscope data 4k 16:9 30fpv. The 4k 16:9 120fps gyro data is there and when you switch to 4k 4:3 30fps without restarting the camera, the gyro data is saved in the file. Pleas you will fix this bug so that when 4k 4:3 30fps recording is enabled, there will be gyroscope data. Have a nice day

I need this firmware too ! I think it's a great evolution of that camera very good DJI ! Now, I want try this firmware, please ?

May I have this firmware update as well?
Davydov.g@icloud.com - account

I'm really looking forward to it, cannot wait until it's finally released.
Is there a time frame for final release or is it still possible to get beta access?

May I have access to the beta firmware? schmeade@gmail.com

Hi, i need this beta frimware please!
pavoda70@gmail.com

bonjour , J'aimerais essayer le firmware !

Hi, Folks!

When I open a video in Gyroflow:



And save it as:



Will it only cut the top,bottom,left,right? Or it also helps for the stabilization? As it's in the export settings, I'm unsure. It might be helpful for the stabilization: if Gyroflow knows the left & right XY pixels, and top/bottom AB pixels are not needed, it could expand its room for the stabilization.

Anyone knows how is this taken into account?

When transiting from normal-light to low-light, I get crazy artifacts with stabilizing with Gyroflow (I guess due to low shutter speed).

Can you make anything to improve this field? Like limiting the shutterspeed to go below 1/xy (which is needed for the stabilization)?

Here is the sample, already corrected with Gyroflow:

Hi, Please add hugh@wherenow.org to the beta list, thanks!