Hi all, firmware requests above have been taken care of, please connect the camera and DJI Mimo app and check for the update.

DJI Susan Posted at 1-5 20:11
Hi all, firmware requests above have been taken care of, please connect the camera and DJI Mimo app and check for the update.

I'm sorry for not requesting it sooner, could you please add me to the beta firmware list my mimo account email is: chrislemanz@gmail.com

ChrisLemanz Posted at 1-5 21:52
I'm sorry for not requesting it sooner, could you please add me to the beta firmware list my mimo account email is:

No problems. The firmware has been added.

Hello, dji.
Thank you.

Is it possible to be part of tester group??? I am FPV-Pilot and the Gyro-Stabilization would be essential important for me
my mimo account email is: alex.leipz@yahoo.de

hi, thanks for the late invitation to the betafirmware.
edit: updated successfully, after reading that miui10 and above you need to turn off wifi assistant...

will tryout this weekend.

Hi!

Now that DJI O3 FPV System has been updated to support 10 bits video mode. Is there any plan to provide that feature to the Action 2?

Thank you!

DJI Susan Posted at 1-5 23:17
No problems. The firmware has been added.

Hi, Unfortunately, I have not received the software yet, even though I registered in due time.
Please check this case

DJI Support Posted at 2022-12-9 07:24
FAQ:
1. How long will it take to receive the beta firmware after filling out the questionnaire?
The Beta firmware will be pushed to your DJI Account on December 20th.

Hello Dji!

I have done another test flying a lot slow and smooth; i think that flying slowly is even harder to stabilize.

You should check these points into the video they have inside some strange vibrations like the first test i've done: 00:24, 00:40, 00:43, 00:46, 00:55, 01:16, 01:23, 01:37, 01:42, 02:02, 02:14, 02:31, 02:46, 03:15, 03:28, 03:37, 03:39, 03:51, 03:58, 04:07, 04:12, 04:22



If this bug can be fixed, for me the stabilization through Gyroflow is perfect!

You can also download the original footage here: https://we.tl/t-z77GTnqySL
Lastly, here you can check my settings on Gyroflow (V. 1.4.2)

DJI Susan Posted at 1-5 23:17
No problems. The firmware has been added.

Hello, could I test the beta firmware too? I was registered but didn't receive it, thanks.

Please add me to the beta firmware. I will try the gyro on my quad, my mimo email: rezalatas@gmail.com

Thank you

Firmware requests above had  been taken care of, please connect the DJI Mimo app and Action 2 and check for the update.

DJI Susan Posted at 1-7 00:16
Firmware requests above had  been taken care of, please connect the DJI Mimo app and Action 2 and check for the update.

Updated successfully, for some reason the Action 2 device was never bonded to my account, I had to dive into Mimo settings, I suppose that's why it couldn't update since the beginning, nevertheless tested indoors handheld and everything works fine with Gyroflow (i've used the software since before A2) will post back with cycling tests results

Please add me to beta firmware,i will try the gyro on my quad, my mimo email ; Luthfian.syab@yahoo.com

Hello

Tested 4k60 in 4:3, stabilization works well. But there was one bug - one out of many recorded samples had missing video and gyro data in random places of the video. I was recording into the camera's internal memory, so that's definitely not the problem.
Here's a link to the sample: dropmefiles.com/nvmAp

Hello, can you add me to beta firmware?  Mail: xalf@libero.itPlease!
Thank you

I'm sorry for not requesting it sooner, could you please add me to the beta firmware list my mimo account email is: krzyspro26@gmail.com

Isaac RC Posted at 1-7 04:00
Updated successfully, for some reason the Action 2 device was never bonded to my account, I had to dive into Mimo settings, I suppose that's why it couldn't update since the beginning, nevertheless tested indoors handheld and everything works fine with Gyroflow (i've used the software since before A2) will post back with cycling tests results

Thank you for your information!

Hi all, firmware requests above should all receive the firmware, please connect the DJI Mimo app and Action 2 and check the update.

Hello, can you add me to beta firmware?  
Mail: ckb.matu@gmail.com

Thank you

Hello DJI.

Folliwinf up my tests.

I think the gyro update ratio is not enough to smooth some vibrations in some drone scenarios. Or perhaps it is the sensibility... I have no idea. However, I have solid tests here in a windy day please check them out:

1- Original video (shaky)
2- Stabilized using Gyrodata via Gyroflow. (stabilized but shaky)
3- Stabilized using drone's Blackbox via Gyroflow. (looking much better than original GyroData)

Please check 3 videos (4k, needs to be seen view fullscreen) but if you want a more sophisticated example video let me know I have very limited time but I can do more if DJI needs me to do it.

Video 1 (original):


Video 2 (stabilized using internal Gyro data):



Video 3 (stabilized using internal blackbox drone data):

Hi, Sorry I didnt receive any of the notification.
I would like to try out the new firmware on gyroflow.
Can you please send me the link to: ly.gin0315@gmail.com

Appreciate so much

Hi, firmware requests above should receive the firmware now, please check.

Sorry I have updated the video test to something way more professional:

Following up my tests.

I think the gyro update ratio is not enough to smooth some vibrations in some drone scenarios. Or perhaps it is the sensibility... I have no idea. However, I have solid tests here in a windy day please check them out:

LEFT- Original video (shaky)
CENTER- Stabilized using Gyrodata via Gyroflow. (stabilized but shaky, not profesional level)
RIGHT- Stabilized using drone's Blackbox via Gyroflow. (looking much better than original GyroData, professional level)

Check the 4k video here:

Hello, just sent you a personal message with a request to be added into the beta program please DJI Susan. Thank you!

i want to join our beta tester program

I want to delete my post

Please add me to the beta firmware. I will try the gyro on my quad, my mimo email: tyarts@gmail.com

Thank you.

Please add me to the beta firmware.
Email : yasuyuki.bigair@gmail.com
Thank you.

Excuse me, let me participate in beta firmware.
My mail address ：krkr1211@icloud.com
Thank you

Please add me to beta firmware.
My mail address : carwenstyle@gmail.com
Thank you.

Hello, could you please add me to the beta firmware. My mimo account is : paulfernando.chamorro@gmail.com
Thanks!

Hello DJI, after our test when will be released another firmware version with new implementations and bug fixes?

Is it possible to get the Beta Firmware cause i signed up but i didnt get it on my 2 Action 2 cams.

Thanks in advance!

Hi, let me participate in beta firmware.
My mail address ：fujikurius@gmail.com
Thank you!

Hello, can you add me to beta firmware?  
Mail: nullrnd@gmail.com

Thank you

....................................................................

Hello, please add me to the beta version of the firmware. My account: vobd@yandex.ru
Thank you!

Hi, Dji. Can I test a new firmware? antoxa222@mail.ru
Thank you

Hello , can I test the beta version of the firmware ?
My address is   
kurosuke277@nifty.com
Thank you.