Hi,

I have sucessfully run DJI VirtualFlight on my Pixel6. But when connecting the remote2 I have several strange issues :
1) when connected with the Goggles V2, everything is Ok and "Mode1 sticks" of the remote2 are working
2) when connected with only remote2 via USB to the phone Mode1 sticks are reversed (up/down), Flying is impossible.



A dirty workaround is to put the remote2 into mode 1 on the avata, then launch the VirtualFlight App and tell it you are in mode2.
Then mode 1 is "almost selected", sticks are working in mode 1 but are displayed "reversed" on the phone. Flying is possible.


Please correct this !


3) le App is working on Pixel6 phones android13, but NOT on Pixel7...

Hello, there. Thanks for your feedback. We have forwarded your post to our designated teams.

DJI Wanda Posted at 12-20 19:59
Hello, there. Thanks for your feedback. We have forwarded your post to our designated teams.

Thank you for this reply.

freedom2000 Posted at 12-20 23:44
Thank you for this reply.

You are most welcome. We feel grateful for our customers' support all the time.

Hi Freedom2000 and DJI Wanda

My problem is that i can't change the flying mode in Academz mode and in the simulation too.
Have you any solution for this?

Thx

If you have the remote2 FPV controller, then you can change the flying mode on the DJI simulator using the regular three positions switch (left hand)

Attish987 Posted at 2-19 02:53
Hi Freedom2000 and DJI Wanda  

My problem is that i can't change the flying mode in Academz mode and in the simulation too.

Hi, Attish987. What device are you using with the DJI Virtual Flight application?

Hi,
I confirmed this app note working on Google Pixel 7.