Hallo bitte gebt das c1 label für die Schweiz frei. Wir wollen nicht in der übergangskategorie fliegen da es einschräcnkungen gibt!!!!

Hi there. Thank you for reaching out. We are sincerely sorry for any inconvenience caused. Yes, we are still working on the firmware to ensure the aircraft flying in Switzerland are granted the C1 label. The C1 label is estimated to be available within Q1 of 2023. Per the EASA regulation (https://www.easa.europa.eu/en/do ... tegory-civil-drones ), there will be flight limitations on the aircraft without a C1 certificate and without C1-compliant firmware to fly in the A2 Open Category until 31 December 2023; or in the A3 Open Category after 1 January 2024.
However, during the 2023-2024/01/01 period, all EEA countries have a one-year transition period. During the transition period, you can fly without a C1 certificate until the end of 2023, but if you need to fly in A2 open category, you may be asked to pass the exam as requested.
For more details and the requested exam of the regulation during the transition period, please refer to the following website:
https://www.bazl.admin.ch/bazl/e ... dnishilfe/news.html
https://www.bazl.admin.ch/bazl/e ... e_limited-open.html
We appreciate your understanding and support.  Should you have further concerns, please reach back here at DJI Forum. Have a nice day.

Hello just join the EU...!     

frankymusik Posted at 1-6 08:10
Hello just join the EU...!

Sehr konstruktiv!

fansccc5c4a4 Posted at 1-12 07:26
Sehr konstruktiv!

... wenn die Schweiz diese Regeln mit der EU nicht vereinbart, wie soll dann DJI dafür sorgen, dass die C1-Zertifikation für Euch gilt?
Sehr unlogisch, diese Nachfragen hier (noch dazu auf Deutsch!)...   

frankymusik Posted at 1-12 07:47
... wenn die Schweiz diese Regeln mit der EU nicht vereinbart, wie soll dann DJI dafür sorgen, dass die C1-Zertifikation für Euch gilt?
Sehr unlogisch, diese Nachfragen hier (noch dazu auf Deutsch!)...

Hello frankymusik
The question is only illogical for those who do not know that Switzerland has adopted the EU regulations since 01.01.2023.

pspec Posted at 1-12 08:00
Hello frankymusik
The question is only illogical for those who do not know that Switzerland has adopted the EU regulations since 01.01.2023.

... oh!   
Excuse me, I thought you were still "locked up"...     

frankymusik Posted at 1-13 01:57
... oh!   
Excuse me, I thought you were still "locked up"...

Wrong. Now we are locked up

Hallo Gibt es News für den Termin der Zertifizierung in der Schweiz? Wir sind noch immer an Regeln der Übergangskategorie gebunden, welche für Business teilweise unmöglich sind.

Mavic3_User_Swi Posted at 2-17 01:21
Hallo Gibt es News für den Termin der Zertifizierung in der Schweiz? Wir sind noch immer an Regeln der Übergangskategorie gebunden, welche für Business teilweise unmöglich sind.

Hallo? 1. Quartal wäre nun vorbei!!! DJI wie sieht es aus????

DJI Tony Posted at 1-5 00:49
Hi there. Thank you for reaching out. We are sincerely sorry for any inconvenience caused. Yes, we are still working on the firmware to ensure the aircraft flying in Switzerland are granted the C1 label. The C1 label is estimated to be available within Q1 of 2023. Per the EASA regulation (https://www.easa.europa.eu/en/domains/civil-drones/drones-regulatory-framework-background/open-category-civil-drones ), there will be flight limitations on the aircraft without a C1 certificate and without C1-compliant firmware to fly in the A2 Open Category until 31 December 2023; or in the A3 Open Category after 1 January 2024.
However, during the 2023-2024/01/01 period, all EEA countries have a one-year transition period. During the transition period, you can fly without a C1 certificate until the end of 2023, but if you need to fly in A2 open category, you may be asked to pass the exam as requested.
For more details and the requested exam of the regulation during the transition period, please refer to the following website:

This makes the C2 label for the M3E super important. Please get on this.

CuAnnan Posted at 4-12 11:59
This makes the C2 label for the M3E super important. Please get on this.

Thanks for your feedback. We'll forward this to our related team for attention. Thanks for your continued support.

Mavic3_User_Swi Posted at 2-17 01:21
Hallo Gibt es News für den Termin der Zertifizierung in der Schweiz? Wir sind noch immer an Regeln der Übergangskategorie gebunden, welche für Business teilweise unmöglich sind.

I updated my Mavic 3 today and the newest firmware update allowed me to apply for the C1-Label for CH!

Mavic3_User_Swi Posted at 4-12 06:53
Hallo? 1. Quartal wäre nun vorbei!!! DJI wie sieht es aus????

it's available, I applied today!

fansa979b897 Posted at 4-26 04:53
I updated my Mavic 3 today and the newest firmware update allowed me to apply for the C1-Label for CH!

I have found the c1 label link on the customer support page. Tried it the the last 3 days. Added my address but through the submit this to my address it says there is a system failure. All the time what do I wrong?

LNNGRDCWB Posted at 4-29 23:37
I have found the c1 label link on the customer support page. Tried it the the last 3 days. Added my address but through the submit this to my address it says there is a system failure. All the time what do I wrong?

Hello, there. Sorry for the inconvenience. Would you please send us your information in PM? We will try our best to help you.

LNNGRDCWB Posted at 4-30 09:06
[view_image]

Thank you for the reply. Please check your Private message and tell us all the information in PM.

LNNGRDCWB Gepostet um 30.4. 09:06
[view_image]

Bei mir kommt auch dieselbe Fehlermeldung!

LNNGRDCWB Posted at 4-30 09:06
[view_image]

Bei mir auch Systemfehler. Dieselbe Fehlermeldung

DJI gibt Unterstützung. Ihr müsst es ihnen aber melden...Bei mir läuft das ganze nun per Postweg. Ein Brief mit den Zertifizierungslabeln ist unterwegs. Das dauert aber ein Weilchen. Ich gebe Report wie es läuft...

fansa979b897 Posted at 4-26 04:54
it's available, I applied today!

Is the process accomplished? Have you received the c1 labels? Or is it still open?

Thank you..

Have the same problem with the system error
Where can I report it ?

" I have found the c1 label link on the customer support page. Tried it the the last 2 days. Added my address but through the submit this to my address it says there is a system failure. All the time what do I wrong?"

Thanks for the help

fans8af83cfa Posted at 5-21 00:56
Have the same problem with the system error
Where can I report it ?

Hi there. Thanks for reaching out, and we're sorry for the inconvenience. We'll be sending you a PM to gather some details for the manual application. Kindly check your inbox.

no message are coming

Mavic3_User_Swi Posted at 6-3 00:33
no message are coming

Hi there. Thanks for reaching out. Can you please elaborate more on the issue you encountered? We'd love to you. Thank you.

I found the link to the C1 label in the Dji Fly app. Tried it for the last 5 days. Added my address but when sending it says there is a system error. What am I doing wrong?

fansb56bfd81 Posted at 6-3 08:51
I found the link to the C1 label in the Dji Fly app. Tried it for the last 5 days. Added my address but when sending it says there is a system error. What am I doing wrong?

Hi there. Thanks for reaching out, and apologies for the inconvenience. We want to help you submit the application manually. Please check your inbox for more details. Thank you.

I try to get the C1 label in Switzerland - the only thing i get is a message saying system error - try later...
get this working ! this is really anoying and it seems i am not the only one....

Is there any news about C1 registration for Switzerland