Lyzarr
lvl.1
Germany
Offline
|
I wanted to use my Mini 2 after a long time, but found that it would not turn on. Yes, I know how to boot DJI drones, have several. But the Mini does not respond at all to the power button. Not even a single LED flashes briefly. Nothing at all.
Of course, I have already searched Google for solutions. Among other things, I worked through this detailed troubleshooting guide:
https://flythatdrone.com/blog/dji-mini-2-wont-turn-on/
as well as:
https://flythatdrone.com/blog/dj ... ot-charging-solved/
To clarify: I only flew the drone twice, for about 20 minutes each time. These were pure camera test flights within a radius of 20 metres in an open area. No crashes, no damage, not even the smallest scratch. The thing looks like new.
The drone was last flown 2 years ago, since then I have kept it indoors in the Flymore bag. As well as the batteries, which I do not keep inside the drone or the charger, but separately in this bag.
Yes I checked the terminals both in the drone as well as on the batteries. Everything is in perfect order.
And with all three batteries the same result.
I also went through the procedure if the batteries were in hibernation state. (see linked guides above)
I also charged the batteries in the drone using the DJI charger and left them in this state for more than 12 hours to get them out of hibernation mode in case of doubt.
When charging in the drone, the LEDs on the underside and the front light also work.
But there is no reaction to pressing the power switch (short press, press and hold).
That's wonderful, a drone that breaks down through disuse.
|
|