Psychomaniac
lvl.1
South Africa
Offline
|
Hi All.
Couple of things to mention.
I know that online shops selling the motors call it yaw, pitch etc, but thats incorrect. Above picture has all the motors labelled incorrectly.
The motor with the the flex and connectors on both sides is in fact the yaw ( left and right gimbal movement ).
The motor labelled pitch is actually the roll motor ( rotate left and right gimbal movement ).
The motor labelled yaw is actually the pitch motor ( up and down gimbal movement ).
As far as only using 2 of the 3 clips for those rubbers, yes it will work. Those rubber are not actual stoppers as the stoppers are built into either sides of the yaw arm, 1 in the pitch motor, the other in the free spinning bearing assembly. You might need to test this with flying as high as you can, and checking pitch and yaw movement.
The arm however will likely not hold for long. I have replaced a few of these arms, and fans77b0fdb2 above is correct, can get all the needed parts on Ali Express.
I myself did a pitch motor replacement and now need to calibrate, but alas, no python script for the mini 3 pro yet.
Any questions you are welcome to HMU. Alternatively can link our Youtube channel.
|
|