Finally got the max speed adjustment settings in the new M3P firmware update this morning. Additional batteries did not require update. Looking forward to testing it out soon. Sunny but too windy today.

Tested in doors and it does what it says in tin!!!!
Thank You DJI!!!!

Max speed for what ?

Lieutenant Posted at 3-28 16:50
Max speed for what ?

Not for max but more important for what we called Tripod Mode ie: lowering the speed

Is that the max speed in cine mode people were complaining about?  If so, what can you set it to?

You can set horizontal as well as vertical max speeds in all three flight modes. 1 Meter per second (2.2 mph) is the lowest I have.

Bodkins Best Photography Posted at 3-28 16:57
Is that the max speed in cine mode people were complaining about?  If so, what can you set it to?

I think before the default was 6.1m/s but now you can adjust from 1.m/s upwards

Norbert747 Posted at 3-28 17:06
I think before the default was 6.1m/s but now you can adjust from 1.m/s upwards

I have tested and it definitely gives you much lower speeds  

Firmware version ?

This is great news!  Worth doing the update tonight!  Thank you!

Hi there. We appreciate you for sharing this information with us. Yes, the DJI Mini 3 Pro releases a new firmware update v01.00.0480 which includes the following.
-Added Reset All Settings and Clear All Data options. Refer to the Mini 3 Pro User Manual v1.6 for details.

-Added Gain and Expo Tuning. The maximum flight speed, brake sensitivity, and other settings can be adjusted in different flight modes.

It is recommended to update your firmware to the latest to have the following features. Again, we're glad to hear that you're enjoying the new update. If you have any questions or concerns, feel free to ask! Thank you for your valued support.

That's good news. I am curious to test it - spring is approaching (somehow) and daylight stays longer.

DJI Paladin Posted at 3-28 21:30
Hi there. We appreciate you for sharing this information with us. Yes, the DJI Mini 3 Pro releases a new firmware update v01.00.0480 which includes the following.
-Added Reset All Settings and Clear All Data options. Refer to the Mini 3 Pro User Manual v1.6 for details.

Hi! Would it be possible to post a link to the new manual? When I look here: https://www.dji.com/uk/downloads/products/mini-3-pro  for example, the latest manual I see is 1.4

Thanks DJI. I’ve installed it and hope to test it out soonest.

MRDroneRookie Posted at 3-28 16:59
You can set horizontal as well as vertical max speeds in all three flight modes. 1 Meter per second (2.2 mph) is the lowest I have.

Thta is a useful addition, for sure.

Hi,
after updating the drone this morning, I noticed that there are no updates for the extra batteries, is this normal?
Thanks

Still no course lock though.

CPS Posted at 3-28 23:04
Hi,
after updating the drone this morning, I noticed that there are no updates for the extra batteries, is this normal?
Thanks

I too Didn't get prompted for battery update so i guess it's normal!

Norbert747 Posted at 3-29 00:04
I too Didn't get prompted for battery update so i guess it's normal!

ok thanks!
I go out for a job, I usually never update before, but the possibility of having the reduced speed was too important, I'll let you have my impressions later.

Good to see this has arrived finally. Here is a communication I had with DJI on March 11th that DJI said this to me in an email I sent them...


*******

"Greetings from DJI Technical Support!

Thanks a lot for your response and for giving us more context. We'd like to shed some light on your concern.

As per our Engineers, indeed the Mini 3 Pro and the rest of the Mini Series drones do not have yet the function you are inquiring about.

What we did is submit a feedback to our management team, so they can check for this on the next update. But we still do not have any tentative date. As soon as there's an update though, it will be announced on our Official website."


*******

Paul.

Very nice update

DJI Paladin Posted at 3-28 21:30
Hi there. We appreciate you for sharing this information with us. Yes, the DJI Mini 3 Pro releases a new firmware update v01.00.0480 which includes the following.
-Added Reset All Settings and Clear All Data options. Refer to the Mini 3 Pro User Manual v1.6 for details.

Just to make sure: Isn't it v01.00.0500?

Where can I download the1.6 version of the users manual?
So far only the 1.4 users manual is available on the download page.

supergeo.ca Posted at 3-29 02:13
Where can I download the1.6 version of the users manual?
So far only the 1.4 users manual is available on the download page.

Same for me.
DJI appear to have updated the Mini 3 Download Centre user guide data, but not for the M3Pro.
I have been able to complete the FW updates for DJI RC: v.01.02.0500 & M3Pro Aircraft FW v.01.00.0500.

I updated mine last night and it was so slow in fact the RC was heating up so had to put the fan on it. Hopefully worth it though and a bonus didn’t have to update all batteries either.

Cruise Control???

CPS Posted at 3-28 23:04
Hi,
after updating the drone this morning, I noticed that there are no updates for the extra batteries, is this normal?
Thanks

Same here so maybe they have realised that it’s very tedious having to pier up and power down the drone every time times by how many batteries you have!

I have tested the new FW and it gives us much lower speed settings.  Unfortunately, no cruise control in this update.  

Nice, I’ll update mine tomorrow.  It flew it since it was repaired and sent back from DJI. Lost a little confidence in it to be fair.

Anybody having problems getting the RC firmware v01.02.0500. DJI Mini 3 aircraft Firmware update promoted as normal, and applied without no problems. But the RC do not prompt for update v01.02.0500. Tried to use DJI assistance 2. But it shows current RC firmware v01.02.0400 - and do not offer RC firmware v01.02.0500. Meaning that new features like adjusting the speed in the flight modes is not available.

Korshawk Posted at 3-29 14:31
Anybody having problems getting the RC firmware v01.02.0500. DJI Mini 3 aircraft Firmware update promoted as normal, and applied without no problems. But the RC do not prompt for update v01.02.0500. Tried to use DJI assistance 2. But it shows current RC firmware v01.02.0400 - and do not offer RC firmware v01.02.0500. Meaning that new features like adjusting the speed in the flight modes is not available.

Others are also having issues. This thread

Korshawk Posted at 3-29 14:31
Anybody having problems getting the RC firmware v01.02.0500. DJI Mini 3 aircraft Firmware update promoted as normal, and applied without no problems. But the RC do not prompt for update v01.02.0500. Tried to use DJI assistance 2. But it shows current RC firmware v01.02.0400 - and do not offer RC firmware v01.02.0500. Meaning that new features like adjusting the speed in the flight modes is not available.

Por aqui igual:
Firmware da aeronave: v01.00.0500
DJI RC Firmware do controlador remoto: v01.02.0400

dgi fly:1.9.4

Ando à procura de solução...

Nice update for sure!

Andreja Posted at 3-28 22:57
Hi! Would it be possible to post a link to the new manual? When I look here: https://www.dji.com/uk/downloads/products/mini-3-pro  for example, the latest manual I see is 1.4

Hi there. Kindly please check the link below for the v1.6 manual of the DJI Mini 3 Pro. Thank you for your valued support.

https://dl.djicdn.com/downloads/ ... _Manual_v1.6_EN.pdf

I was hoping for Cruise Control too...in fact is simple to be made, as the same RC is used for Mavic 3 in Cruise control...

Sounds like a nothing burger update