How to fix or to disable those sensors

My Phantom 4 RTK, indicated the same problem. I connected it to the computer, with the dji assistant 2 program and calibrated the sensors. Started working again

lucasodria Posted at 3-30 03:14
My Phantom 4 RTK, indicated the same problem. I connected it to the computer, with the dji assistant 2 program and calibrated the sensors. Started working again

yeah, but for Mavic 3 no such options in Assistant

ivnn Posted at 3-30 03:16
yeah, but for Mavic 3 no such options in Assistant

Dont have the option "Calibrate Sensor"?

lucasodria Posted at 3-30 03:17
Dont have the option "Calibrate Sensor"?

yeah, no options to calibrate

ivnn Posted at 3-30 03:18
yeah, no options to calibrate

You need to use the same software from Mavic Pro.


In the Assistant have the option.
Sorry if you tried this, but is the only way that i know.

lucasodria Posted at 3-30 03:31
[view_image]

unfortunately, this sw only for pro series

ivnn Posted at 3-30 05:39
unfortunately, this sw only for pro series

Why DJi dont make a standard software for the series drones, with the same functions.

I really like DJI, but some things make me crazy.

lucasodria Posted at 3-30 07:22
Why DJi dont make a standard software for the series drones, with the same functions.

I really like DJI, but some things make me crazy.

cool device until you crush it, a lot of errors check and "preconditions" before fly

#Quick Reply Here#dji Service center  mavic 3 classic vision sensor calibration error code 16200202

sk javed Posted at 9-21 04:56
#Quick Reply Here#dji Service center  mavic 3 classic vision sensor calibration error code 16200202

Hello! We have left a comment on your post at this link: https://forum.dji.com/forum.php . Thank you!

• Error code 16200202 in the context of vision sensors calibration likely pertains to a specific issue with a piece of equipment, which may not be widely documented. To resolve this error, you should consult the user manual or technical support resources provided by the manufacturer of the vision sensor or the equipment where the sensors are integrated. They can provide specific guidance on how to address this error and calibrate the sensors correctly.
  

My DJI air 3 drone, sensor damage error code

Dev Kumar Posted at 3-20 04:01
My DJI air 3 drone, sensor damage error code

Hi there. Sorry about the experience. We are more than glad to assist. May we know what is the exact error message are you getting? Thank you very much.

have the same issue

Vision sensors calibration error Code: 16200202
won't let the drone take off

how can i calibrate it??

fansbca1da32 Posted at 5-3 12:16
have the same issue

Vision sensors calibration error Code: 16200202

Was having the same issue here with my Air 3. If it helps, installed the DJI Assistant 2 (Consumer Drones Series) onto my laptop, plugged a USB-C cable to my drone, and upgraded to the current version presented (v1.00.1300). Thus far I've power-cycled the drone at least 6 times and no more errors popping up on the controller.

Hope this helps.

Guys is this error solved? If yes, how u did it?

AtharvaN Posted at 8-15 11:35
Guys is this error solved? If yes, how u did it?

Hi there,
thank you for reaching out.

May we confirm if you have refreshed the firmware update to see if it can isolate the issue?

Looking forward to your response. Thank you.

DJI Diana Posted at 8-16 01:33
Hi there,
thank you for reaching out.

I have updated it. The only issue is that you guys have not added a option to calibrate mini 4 pro in the the DJI assistant app- fix this asap.