OK, whoever wants my 3d printed windsurfer can have it for free, i have no use for it. its brand new, from the dude on ebay!!

I'll take it

did it not work for you?

LICENSED PILOT Posted at 2015-8-23 06:11
did it not work for you?

to be honest, no. but i have been following some of the threads and the majority are experiencing good results.

just a little side note. if you guys dont click on the "reply" icon on a persons thread or any of the answers in that thread, whoever you are answering to will not get a reminder in his home page

rayrokni Posted at 2015-8-23 06:55
just a little side note. if you guys dont click on the "reply" icon on a persons thread or any of th ...

I can send you some cash for shipping cost ( paypal verified )

Let me know

SkySurfer Posted at 2015-8-23 06:56
I can send you some cash for shipping cost ( paypal verified )

Let me know

what state r u in?
not mental state, lol

rayrokni Posted at 2015-8-23 06:55
just a little side note. if you guys dont click on the "reply" icon on a persons thread or any of th ...

Very true. I wish more people knew this. I miss questions all the time because of it.

DJI-Dave Posted at 2015-8-23 07:02
Very true. I wish more people knew this. I miss questions all the time because of it.

so do i get a job dave?

rayrokni Posted at 2015-8-23 07:00
what state r u in?
not mental state, lol

Mental state,lol, in the eyes of my wife, CRAZEEEEEE, but overall I think I'm ok     

San Fernando,  Ca,  91340

SkySurfer Posted at 2015-8-23 07:05
Mental state,lol, in the eyes of my wife, CRAZEEEEEE, but overall I think I'm ok     

San Ferna ...

Ok guys, Skysurfer was the first one to ask for it, so i m sending the WINDSURFER to SKYSURFER!! it is a match made in heaven.
hey bud, my email is rayrokni@gmail.com
email me your address and i will mail it on monday

rayrokni Posted at 2015-8-23 07:07
Ok guys, Skysurfer was the first one to ask for it, so i m sending the WINDSURFER to SKYSURFER!! i ...

woohoo  !!

suckers, j/k

email you right after this reply

rayrokni Posted at 2015-8-23 06:53
to be honest, no. but i have been following some of the threads and the majority are experiencing  ...

I've got my own 3-d printer. Made many many accessories for mine and only spent $1300 ;)

Gabe R Posted at 2015-8-23 07:42
I've got my own 3-d printer. Made many many accessories for mine and only spent $1300 ;)

what accessories have u made, maybe interested in some if they make sense?
thx

rayrokni Posted at 2015-8-23 07:45
what accessories have u made, maybe interested in some if they make sense?
thx

A support for the tablet holder that goes on the top, a lens cap, the holder to turn it into the ronin, signal booster.

You know ray i am looking into doing the following :
And forget about those little tiny hot pockets LOL

Willie Wonka Posted at 2015-8-23 09:29
You know ray i am looking into doing the following :
And forget about those little tiny hot pockets  ...

I m still laughing, imagine this picture in ur head:
This last picture of yours with the antennas,
a circular shower curtain which u can step into so u can see the damn screen
and last but not least that diesel power generator we saw on the thread the other night as a battery charger.

rayrokni Posted at 2015-8-23 09:46
I m still laughing, imagine this picture in ur head:
This last picture of yours with the antennas, ...

OMG !!!  and then a couple of lamp shades for the drones and we will be the flying circus LOL

Willie Wonka Posted at 2015-8-23 09:50
OMG !!!  and then a couple of lamp shades for the drones and we will be the flying circus LOL

I'll be the ring master

Willie Wonka Posted at 2015-8-23 09:29
You know ray i am looking into doing the following :
And forget about those little tiny hot pockets  ...

I did this for my old P2V+. It worked wonderfully.

jimcloud74@yaho Posted at 2015-8-23 10:49
I did this for my old P2V+. It worked wonderfully.

I don't know anything about antenna's, so sorry for the stupid questions... can this be added to any P3 remote control to extend the range?  If so, what kind of range do you get out of this beefed up antenna?  I have a P3 standard which has only a single antenna on the remote

jimcloud74@yaho Posted at 2015-8-23 10:49
I did this for my old P2V+. It worked wonderfully.

That looks great and i see an amp in the back, you can reuse all this with the phantom 3, but i think an amp is very necessary because if the cable run is more and a couple of inches the losses in signal are so great that it becomes useless.

You guys are hilarious.

Willie Wonka Posted at 2015-8-23 11:45
That looks great and i see an amp in the back, you can reuse all this with the phantom 3, but i th ...

I use the "all in one" with my 3 FPVLR stage 1 and stage 2 when I need to flyway out or where there is excessive interference. To answer you question Squid, I modded the remote and put a RHCP 5.8ghz antenna that increased the range way out beyond the WIFI video.  All of these mods corrected the video and I was able to fly out 6500 feet. Put it this way, Just adding the antennas without the booster took me out twice as far as stock.

squidlyboy Posted at 2015-8-23 11:17
I don't know anything about antenna's, so sorry for the stupid questions... can this be added to a ...

I use the "all in one" with my 3 FPVLR stage 1 and stage 2 when I need to fly way out or where there is excessive interference. To answer you question Squid, I modded the remote and put a RHCP 5.8ghz antenna that increased the range way out beyond the WIFI video on my P2V+.  All of these mods corrected the video and I was able to fly out 6500 feet. Put it this way, Just adding the antennas without the booster took me out twice as far as stock. The P3S has 2 small wire type antennas in the WIFI extender. You can open it, replace the antennas with the mini sma type screw on hubs that allow you to install ANY type of sma based deal. There are videos on youtube on the installation procedure. It isn't difficult and the parts are cheap. I may have a few of the connectors lying around if you need them. Heck, I would be willing to sell the whole deal if you were interested.

SkySurfer Posted at 2015-8-23 05:56
I'll take it

OK, I sent it out USPS today, you should get it thursday,

rayrokni Posted at 2015-8-25 09:24
OK, I sent it out USPS today, you should get it thursday,

Thank you

I replied to your email

Let me know if you received it


But just in case

Thank you for this gift

SkySurfer Posted at 2015-8-25 11:03
Thank you

I replied to your email

yes i did, and you are welcome, remember once you use any parabolic range extender, your aim needs to be more accurate.

jimcloud74@yaho Posted at 2015-8-24 09:38
I use the "all in one" with my 3 FPVLR stage 1 and stage 2 when I need to fly way out or where t ...

That thing looks super impressive Jim!   It also looks like its difficult to move around and not something that easily attaches to the remote, like its got to be lugged around.  Hard to tell from the pic though.   I think the spec's say that i have a range of about 1000km/0.6miles.  So you are saying with this rig, i can go over a mile??  That's some serious range.

How much?

squidlyboy Posted at 2015-8-26 09:29
That thing looks super impressive Jim!   It also looks like its difficult to move around and not s ...

It is not s super easy move but it's light weight and easy to set up. The stand separates into two pieces.You are using a P3S correct? If you mod your WIFI transmitter and your tx controller, you could use a higher db antenna and that would double your range immediately without the use of a booster. The WIFI booster is what really does the long range trick though. I have gone out 10k feet with my P2V+ using this with no problem. Have you looked into what it takes to modify the components? If so, are you willing to do it? (It is much easier than the P3A and P. What's max distance worth to ya?

jimcloud74@yaho Posted at 2015-8-27 04:44
It is not s super easy move but it's light weight and easy to set up. The stand separates into two ...

yes i have the p3s - again sorry for the noob questions, but do you have links to do this wifi transmitter / tx controller mod?  is it relatively simple? i don't wanna mess up my $800 toy

i'm slightly confused by what you said though.  There's a wifi tx / tx controller mod and then separately there's an antenna mod right?  did you do one, the other or both?

sorry for the stupid questions

Btw... you're not the Jim Cloud (system engineer) that used to work for Motorola GSTG in Scottsdale Arizona are you?  haha...

squidlyboy Posted at 2015-8-27 14:02
yes i have the p3s - again sorry for the noob questions, but do you have links to do this wifi tran ...

It is a pretty straight forward and easy mod. The videos here are pretty good at explaining. The guy on the controller mod soldered the lead to the board. This is NOT necessary as the pigtail will plug right in to where you remove the old pigtail. No, I am not from Az. LOL. There seem to be a great many Jim Clouds In the world.

Gabe R Posted at 2015-8-22 21:12
A support for the tablet holder that goes on the top, a lens cap, the holder to turn it into the r ...

Any interest in making those for fellow members (of course with payment)?

KalebA Posted at 2015-9-25 15:13
Any interest in making those for fellow members (of course with payment)?

What would you be interested in??

Gabe R Posted at 2015-9-27 04:59
What would you be interested in??

Haha all of the above actually, all of it useful stuff

If I had to pick though the "ronin" and signal booster/windsurfer

Gabe R Posted at 2015-9-27 04:59
What would you be interested in??

Hey, trying to reply via PM and doesn't seem like its working, can you PM me your email and we can communicate through there