DJI Gamora
Administrator
Offline
|
Props Posted at 4-26 10:36
Is it necessary to bind it here in order to make the motion controller 2 and Goggles 2 to work? I'm getting an error that they cannot connect. I have done all the upgrades of the firmware and I see the Mini 3 Pro in the goggles but it won't complete the connection and allow me to fly. The controller doesn't connect at all, it just flashes. Both of these work perfect with my Avata.
Hi, Props. Thank you for reaching out. To link the devices, please make sure that the firmware versions are updated, please check the image below for the firmware versions:
Also, before linking make sure to follow the steps below:
1. Power on the aircraft, goggles, and motion controller.
2. Open the goggles menu. Select "Status" and make sure that the aircraft model displayed at the top of the menu is correct. Otherwise, select Switch from the upper right corner of the menu and then select the correct aircraft.
Then please link them using one of the methods below:
After linking please connect the goggles to the mobile phone, and change the bound device in DJI Fly. The path is:
Profile>Device Management>Value-added service>Bind New Device. |
|